Driven magnetic particles on a fluid surface: pattern assisted surface flows.
نویسندگان
چکیده
Magnetic microparticles suspended on the liquid-air interface and subjected to an alternating magnetic field exhibit spontaneous formation of dynamic localized snake patterns. These patterns are accompanied by four large-scale hydrodynamic vortices located at the opposite ends of the snake patterns. We report detailed studies of these large-scale vortices and their relationship to the collective response of magnetic particles in the presence of an alternating magnetic field. We present a model based on the amplitude equation for surface waves coupled to the large-scale hydrodynamic mean flow equation. The model describes both the formation of the dynamic snake patterns and the induced structure of the experimentally observed hydrodynamic flows.
منابع مشابه
Micromachining the Aluminium Tubes Using Abrasive Finishing in Alternating Magnetic Field
This study introduced a method based on magnetic field assisted finishing mechanism for micromachining the inner surfaces of Aluminum tubes. In this approach, using the alternating magnetic field of an AC electromotor, abrasive particles were formed as Magnetic Rods (Magnetic Clusters) and surface micromachining was carried out by the dynamic particular pattern made by an alternating magnetic f...
متن کامل3D Modeling of Wind-Driven Circulation In The Northern Indian Ocean During Monsoon
Abstract The purpose of this research is to design and identify some of the natures and characteristics of high-resolution surface currents in the Northern Indian Ocean. The pattern of 3D circulation of the Wind-driven surface currents, Sea surface temperature (SST) and Sea Surface Salinity (SSS) distribution in the Northern Indian Ocean using The MIT general circulation model (MITgcm) with ho...
متن کاملComparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes
In this investigation, the material removal rate, tool wear rate and surface integrity obtained by EDM, ultrasonic vibrations assisted EDM and magnetic field assisted EDM were studied and compared with together to show the quality of the effects of applying each of ultrasonic vibrations to tool and magnetic field around gap distance of EDM process on material removal rate, tool wear rate, and s...
متن کاملInvestigation on Process Parameters of Ball Screw Finishing Using Magnetic Abrasive Field
Surface finishing is one of the most significant steps in industries which are engaged with surface quality. Finishing by magnetic field is a new method of surface finishing. In this process, machining is executed in mechanical way and semi-homogeneous abrasive slurry performs finishing of surfaces. Needed force to grind surfaces is made by magnetic field. Therefor this method is considered as ...
متن کاملUnderstanding Ferrofluid Spin-Up Flows in Rotating Uniform Magnetic Fields
Ferrofluid spin-up flow has been studied in finite height cylinders and spheres subjected to a uniform rotating magnetic field. Ultrasound measurements in finite height cylinders with a free surface show the presence of surface driven flows as well as bulk flows. In finite height cylinders with a cover, only bulk flows exist. Ultrasound measurements in fully filled spheres of ferrofluid give ne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 99 15 شماره
صفحات -
تاریخ انتشار 2007