Systematic Design of High-Performance Smart Card with HF/UHF Dual-Band RFID Tag
نویسنده
چکیده
Recently, there have been widely conducted researches on dual-band radio frequency identification (RFID) tag based on 13.56 MHz (HF) and 900 MHz (UHF). Most dual-band RFID tag has been implemented so that each antenna is separated in a different inlay sheet respectively, which makes the resulting smart card impractically thick, and the typical drawback of dual-band RFID tags incorporated in one inlay is a mutual frequency interference phenomenon due to the fabrication of the HF antenna and the UHF antenna on the same sheet. In this paper, we introduce a novel design of high performance smart card with HF/UHF dual-band RFID tag to overcome the frequency interference problem. Firstly, we have design and tested a UHF RFID tag using a simulation software system. In the smart card hardware design stage, we connect a HF antenna and a UHF antenna and place them in one inlay sheet. Using a spectrum analyzer, we systematically adjust the antenna pattern to detect the optimal patterns that fit the impedance of the RFID chip.
منابع مشابه
Dual-band RFID tag antenna based on the Hilbert-curve fractal for HF and UHF applications
A novel single-radiator card-type tag is proposed which is constructed using a series Hilbert-curve loop and matched stub for high frequency (HF)/ultra high frequency (UHF) dual-band radio frequency identification (RFID) positioning applications. This is achieved by merging the series Hilbert-curve for implementing the HF coil antenna, and square loop structure for implementing the UHF antenna ...
متن کاملCompact Dual Band Tag Antenna Design for Radio Frequency Identification (rfid) Application
The increasing need for automatic identification and object tracking in supply chains has led to the development of radio frequency identification (RFID) systems. High frequency (HF) and ultra-high frequency (UHF) bands are frequently used because of their advantages over other bands. Although many HF and UHF band tags exist, some are unsuitable to handle the hostile environment of a supply cha...
متن کاملDesign and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...
متن کاملMeander-Line UHF RFID Tag Antenna with Semi-Circular Structure
Recently, the demand of the Radio Frequency Identification (RFID) system is increased for using in many applications such as personal access control, logistics, industrial process, product management, including identifying people, animals and products. The frequency band of the RFID system can be divided into four bands such as low frequency (125-134.2 kHz), high frequency (13.56 MHz), ultra hi...
متن کاملA Broadband UHF Tag Antenna for Near-Field and Far-Field RFID Communications
The paper deals with the design of passive broadband tag antenna for Ultra-High Frequency (UHF) band. The antenna is intended for both near and far fields Radio Frequency Identification (RFID) applications. The meander dipole tag antenna geometry modification is designed for frequency bandwidth increasing. The measured bandwidth of the proposed broadband tag antenna is more than 140 MHz (820–96...
متن کامل