Reduce system costs with resolver-to-digital conversion implementation (Rev. A)
نویسنده
چکیده
In a typical precision position servo control system, resolvers or encoders are used to provide shaft position feedback to the control unit. Resolvers are more robust and rugged than encoders, capable of withstanding reasonable amounts of environmental contamination and noise. While encoders’ outputs are in the form of pulse train, resolvers outputs are in the form of amplitude modulated sinusoidal signals that require additional processing to extract position information. This paper explains how TI’s C2000 microcontrollers can effectively process them to obtain the speed and position feedback with higher bit accuracy. Ramesh Ramamoorthy C2000TM Microcontroller Applications Engineer Texas Instruments W H I T E P A P E R
منابع مشابه
A Comparison of the Efficiency and Effectiveness of Radiology Departments in Hospitals before and after Digital System Implementation
Background and Objectives: Considering the importance of the radiology department, which devours most of the financial resources, efficiency and effectiveness in this department is one of the main concern of policymakers in most health care systems. The aim of this study was to investigate the efficiency and effectiveness of a radiology department before and after the implement...
متن کاملFPGA Based Resolver to Digital Converter Using Delta-Sigma Technology
This contribution describes a new FPGA based method to convert the analog resolver signals to a digital position signal using Delta Sigma ADC technology. By using a 2 order ∆Σ modulator it is possible to increase the effective resolution. In a servo drive the significant better signal to noise ratio can be used to build a smoother motor current (less noisy), or to increase the tracking loop ban...
متن کاملAnalyzing Impacts of FACTS Devices in Dealing with Short-Term and Long-Term Wind Turbine Faults
More than one hundred countries are using wind energy due to their easy implementation, cheap energy, and high energy efficiency. Implementation of FACTS devices in Wind Energy Conversion Systems (WECS) has been dramatically improved due to cooperative and accurate performance of FACTS devices. However, dealing with wind turbine faults promptly is crucial. Short-term and long-term faults may ha...
متن کاملRotor Position and Velocity Estimation for a Salient-Pole Permanent Magnet Synchronous Machine at Standstill and High Speeds
This paper addresses self-sensing (“sensorless”) control of salient-pole permanent magnet synchronous motors (PMSM’s). The major contribution of this work is the introduction of a simple-to-implement estimation technique that operates over a wide speed range, including zero speed. The technique achieves simplicity by decoupling the inherent cross-coupling in PMSM’s. The technique utilizes the d...
متن کاملDesign and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...
متن کامل