Error detection is already helpful on the IBM 5Q chip
نویسنده
چکیده
This paper reports on an experiment realized on the IBM 5Q chip which demonstrates strong evidence for the advantage of using error detection and fault-tolerant design of quantum circuits. By showing that fault-tolerant quantum computation is already within our reach, the author hopes to encourage this approach.
منابع مشابه
Fault Alignment Exclusion for Memory Using Address Permutation
A significant improvement in memory fault tolerance, beyond what is already provided by the use of an appropriate error-correcting code (ECC), can be achieved by electronic chip swapping, without any compromise of data integrity as large numbers of faults are allowed to accumulate. Since most large and medium-sized semiconductor memories are organized so that each bit position of the system wor...
متن کاملOptimization of Material Removal Rate in Electrical Discharge Machining Alloy on DIN1.2080 with the Neural Network and Genetic Algorithm
Electrical discharge machining process is one of the most Applicable methods in Non-traditional machining for Machining chip in Conduct electricity Piece that reaching to the Pieces that have good quality and high rate of machining chip is very important. Due to the rapid and widespread use of alloy DIN1.2080 in different industry such as Molding, lathe tools, reamer, broaching, cutting guillot...
متن کاملAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملFault-Tolerant Design Techniques for Semiconductor Memory Applications
Advances in semiconductor memory technology towards higher-density and higher-performance memory chips have created new reliability challenges for the memory system designer. An example would be the multiple-bit-per-chip organization with the chip outputs used in the same word. This design structure would be prone to uncorrectable errors with conventionally implemented single-error-correcting d...
متن کامل