A Microscopic Study of Sodium Cluster Deposition on an Insulating Surface
نویسندگان
چکیده
We present microscopic calculations of the low energy deposition of small sodium clusters on NaCl surface. The substrate surface is taken as inert acting on the cluster through its interface potential. The time evolution of the cluster electronic system is described using the time-dependent density approximation. The dependence of the attachment process on the initial cluster orientation relative to the insulating surface is studied for the case of a Na6 cluster.
منابع مشابه
Simulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملA Comparative Study of Insulators on Magnetic Properties of Sendust Based Nanocomposite Powder Cores
In this study, Sendust (Fe85Si9.6Al5.4) nanostructure alloy was prepared bymechanical alloying and was characterized by X-ray diffraction. In addition, the alloy’smorphology and its distribution particle size were investigated by scanning electronmicroscopy method. The alloyed powders were insulated with 4wt% of three differentinsulating materials including polyvinyl alc...
متن کاملDeposition of Various Shapes Particles on a Rough Surface in Turbulent Flow
An experiment set-up is used to study wall deposition rate of particles on a rough surface in a turbulent channel flow. Deposition velocities for three classes of particles, namely, spherical glass particles, irregular shape polymer particles, and fibrous silicon particles are studied. The particle concentration at the test section was measured with the aid of an isokinetic probe in conjunction...
متن کاملA Study of the Chemical Composition and Heat Treatment of Electroless Ni-B-Tl Alloy Coating on AISI 316 Stainless Steel
Despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. In this research electroless Ni-B-Tl coating was used with the aim to increase their surface hardness. The effects of Nickel chloride, Sodium borohydride, Thallium nitrate and Ethylendiamin on the chemical composition of coating were studied. To achieve an increase in hardness, the effects of ...
متن کاملاثر حضور نانوخوشههای مس به عنوان زیرلایه بر خواص بلوری و نوری لایه دیاکسیدتیتانیوم
Two 10 and 20nm samples of Cu nano-cluster were grown on quartz substrates with a thickness of by electron beam deposition method. Nanolayers of titanium dioxide with a thickness of 300 nm were deposited on these Cu nano-cluster layers. For comparison، a layer of titanium dioxide with a thickness of 300 nm was also coated on quartz substrate. All coatings were conducted using electron-beam phys...
متن کامل