ISSCC 2009 / SESSION 20 / SENSORS AND MEMS / 20 . 8 20 . 8 A 0 . 25 μ m Logarithmic CMOS Imager for Emissivity -
نویسندگان
چکیده
Challenges in the design of solid-state imagers for industrial measurement and control include: high image resolution, wide temperature range, adequate temperature resolution, high measurement speed, thermal stability of the sensor chip, and most importantly, low cost. However, they have the inherent disadvantage that their temperature information is strongly dependent on the emissivity of the probed material. This shortcoming can be eliminated if the ratio of an unfiltered and a filtered response of two photodiodes is considered.
منابع مشابه
ISSCC 2004 / SESSION 17 / MEMS AND SENSORS / 17 . 3 17 . 3 A 2 . 5 V 14 - bit Σ ∆ CMOS - SOI Capacitive Accelerometer
Low cost high precision MEMS accelerometers with near μg resolution and stability are needed in a number of applications ranging from GPS-augmented inertial navigation systems to guidance and stabilization of satellites and spacecrafts [1]. This paper presents a truly 14b Σ∆ modulator interface IC for a highresolution SOI capacitive accelerometer fabricated in a simple stictionless process that...
متن کاملFabrication, Metrology and Modeling of Protective Coatings on Metallic MEMS Components Final Report
A thin film strain-sensor having an active sensing area of 20 mm 100 mm has been developed using a combination of pulsed laser deposition (PLD) and focused ion beam (FIB) machining to net shape. Sensors were made of indium-tin-oxide (ITO) thin films in the range 100–246 nm thick. Strain sensitivities of large-scale (smallest dimension 1⁄4 0:8 mm), small-scale (smallest dimension 1⁄4 0:25 mm) an...
متن کاملHighly Integrated MEMS-ASIC Sensing System for Intracorporeal Physiological Condition Monitoring
In this paper, a highly monolithic-integrated multi-modality sensor is proposed for intracorporeal monitoring. The single-chip sensor consists of a solid-state based temperature sensor, a capacitive based pressure sensor, and an electrochemical oxygen sensor with their respective interface application-specific integrated circuits (ASICs). The solid-state-based temperature sensor and the interfa...
متن کاملAn SOI CMOS-Based Multi-Sensor MEMS Chip for Fluidic Applications †
An SOI CMOS multi-sensor MEMS chip, which can simultaneously measure temperature, pressure and flow rate, has been reported. The multi-sensor chip has been designed keeping in view the requirements of researchers interested in experimental fluid dynamics. The chip contains ten thermodiodes (temperature sensors), a piezoresistive-type pressure sensor and nine hot film-based flow rate sensors fab...
متن کاملGeneration of Electrically Induced Stimuli for MEMS Self-Test
A major task for the implementation of Built-In-Self-Test (BIST) strategies for MEMS is the generation of the test stimuli. These devices can work in different energy domains and are thus designed to sense signals which are generally not electrical. In this work, we describe, for different types of MEMS, how the required non-electrical test stimuli can be induced on-chip by means of electrical ...
متن کامل