Turbulence structure of open channel flows over permeable and impermeable beds: A comparative study
نویسندگان
چکیده
The behavior of turbulent open channel flows over permeable surfaces is not well understood. In particular, it is not clear how the surface and the subsurface flow within the permeable bed interact and influence each other. In order to clarify this issue we carried out two sets of experiments, one involving velocity measurements in open channel flows over an impermeable bed composed of a single layer of spheres, and another one where velocities were measured over and within a permeable bed made of five such layers. Comparison of surface flow velocity statistics between the two sets of experiments confirmed that bed permeability can significantly affect flow resistance. It was also confirmed that even in the hydraulically rough regime, the friction factors for the permeable bed increase with increasing Reynolds number. Such an increase in flow resistance implies a different distribution of normal form-induced stress between the permeable and impermeable bed cases. Subsurface flow measurements performed within the permeable bed revealed that there is an intense transport of turbulent kinetic energy TKE occurring from the surface to the subsurface flow. We provide evidence that the transport of TKE toward the lower bed levels is driven mainly by pressure fluctuations, whereas TKE transport due to turbulent velocity fluctuations is limited to a thinner layer placed in the upper part of the bed. It was also confirmed that the turbulence imposed by the surface flow gradually dissipates while penetrating within the porous medium. Dissipation occurs faster for the small scales than for the large ones, which instead are persistent, although weak, even at the lowest bed levels. © 2009 American Institute of Physics. doi:10.1063/1.3276292
منابع مشابه
A phenomenological model to describe turbulent friction in permeable-wall flows
[1] Describing the canonical properties of turbulent flows over rough-permeable walls such as gravel beds, vegetatedor snow-covered surfaces have, to date, resisted complete theoretical treatment. The major complication in describing such geophysical flows is that the friction factor Reynolds number relationships significantly deviate from their conventional Nikuradse curves or Moody diagrams d...
متن کاملPhysically Realistic Roughness Closure Scheme to Simulate Turbulent Channel Flow over Rough Beds within the Framework of LES
A physically realistic roughness closure method for the simulation of turbulent open-channel flow over natural beds within the framework of large-eddy simulation LES is proposed. The description of bed roughness in LES is accomplished through a roughness geometry function together with forcing terms in the momentum equations. The major benefit of this method is that the roughness is generated f...
متن کاملMathematical Modeling of Flow in a Granular Permeable Bed Channel
In this research, a two-dimensional mathematical model using turbulence model was developed in a rectangular channel with granular permeable bed. Finite volume method was used for numerical solution of governing equations. The equations considered are discretized using Hybrid difference scheme while applying SIMPLE algorithm to correct velocity components in the continuity equation. In the dev...
متن کاملAcross-channel distribution of the mean and tidal flows in the Khuran Channel, Persian Gulf, Iran
The Khuran Channel, Southern Iran (26°45’N), is a topographically complex channel which is open at both ends. Owning to its particular geometry, this narrow channel is subjected to strong tidal currents.Across-channel distribution of the mean and tidal flows were obtained over a semidiurnal tidal cycle in the Khuran Channel where the highest tidal velocity in the third day of the seco...
متن کاملStudy of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...
متن کامل