The effect of diketopyrrolopyrrole (DPP) group inclusion in p-cyanophenyl end-capped oligothiophene used as a dopant in P3HT:PCBM BHJ solar cells.

نویسندگان

  • V M Manninen
  • J P Heiskanen
  • D Pankov
  • T Kastinen
  • T I Hukka
  • O E O Hormi
  • H J Lemmetyinen
چکیده

In this work, two p-cyanophenyl end-capped oligothiophenes, and , were compared as dopants in the P3HT:PC60BM bulk heterojunction (BHJ) layer of inverted organic solar cells. Inclusion of significantly increased the average efficiency of the solar cells, while the increase using doping in the cell efficiency was minor. In the BHJ photoactive layer, the dopant molecules are close to and interact with P3HT and PC60BM molecules. Intra- and intermolecular interactions of the dopant molecules with P3HT and PC60BM were studied in chloroform solutions. Energy or electron transfer from the dopant molecules to PC60BM takes place as the fluorescence emission intensity and lifetime of the dopant molecules decreased in the presence of PC60BM. In the case of doping with , doped cells had higher absorbance than the non-doped reference cell and doping broadens the cell absorption to the near IR-region. Thus, the dopant molecules act as additional light absorbers in the photoactive layer and transfer energy or electrons to PC60BM, which increases the short circuit current and power conversion efficiency of the cell. Also, the emission of the cells doped with decreased when compared to that of the reference cell. In this case, P3HT can give electrons or energy to dopant molecules and the cell current and efficiency are further increased.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of pyridine-capped diketopyrrolopyrrole and its use as a building block of low band-gap polymers for efficient polymer solar cells.

A new building block for low band-gap polymers, diketopyrrolopyrrole (DPP) flanked by pyridine (PyDPP), has been synthesized via a simple synthetic route. PyDPP was polymerized with bithiophene (BT) to afford a low band-gap copolymer (PBTPyDPP) which was used as an electron donor of the active layer in polymer solar cells. The solar cell device based on PBTPyDPP exhibited a promising PCE of 4.9...

متن کامل

Add-on for High Throughput Screening in Material Discovery for Organic Electronics: “Tagging” Molecules to Address the Device Considerations

This work reflects the worth of intelligent modeling in controlling the nanostructure morphology in manufacturing organic bulk heterojunction (BHJ) solar cells. It suggests the idea of screening the pool of material design possibilities inspired by machine learning. To fulfill this goal, a set of experimental data on a BHJ solar cell with a donor structure of diketopyrrolopyrrole (DDP) and ...

متن کامل

Quantum Mechanical Calculations of Photovoltaic and Photoelectronic Properties of Oligoselenophene/Fullerene BHJ Solar Cells

To model the active layer in the hetero-junction solar cells, the C60, C70, PC60BM, PCBDAN fullerenes as acceptor, and (OS)n=1) oligoselenophenes as donor were considered. The (OS)n=14/C60, (OS)n=14/C70, (OS)n=14/PC60BM, and (OS)n=14/PCBDAN blends as a model of the active layer in the BHJ solar cell were chosen, and the optoelectronic properties were studied. The calculated efficiency of these ...

متن کامل

Diketopyrrolopyrrole derivatives for efficient NiO-based dye-sensitized solar cells.

Two new diketopyrrolopyrrole (DPP) based sensitizers (DPP-Br, DPPCN2) and a novel dyad DPP-NDI (NDI = naphthalene diimide) were synthesized and investigated for use in NiO p-type dye-sensitized solar cells (p-DSCs). The simple push-pull DPP-CN2 gives a promising photoconversion efficiency (PCE) of 0.07% with the iodide/triiodide electrolyte while the PCE of the dyad reaches 0.18% with a cobalt ...

متن کامل

The effect of polymer solubilizing side-chains on solar cell stability.

UNLABELLED The impact of side-chain variations on the photothermal stability of solar cells containing poly(benzodithiophene-diketopyrrolopyrrole) polymers are investigated in the absence of oxygen. Four different side-chains of benzodithiophene (BDT) are synthesized and copolymerized with diketopyrrolopyrrole (DPP) by Stille polymerization. The photothermal stability is measured as active laye...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Photochemical & photobiological sciences : Official journal of the European Photochemistry Association and the European Society for Photobiology

دوره 13 10  شماره 

صفحات  -

تاریخ انتشار 2014