Reproducible Evidence for the Generation of a Nuclear Reaction During Electrolysis

Past work in this laboratory has shown that nuclear particles generated during electrolysis can be registered by CR39 plastic detectors held within the electrolyte solution, suspended in the vapor above the solution, or placed just below the metal cathode that serves as the bottom of the electrolyte compartment of the electrolysis cell. However, not every electrolysis experiment produced nuclear particles so that total reproducibility was not achieved. Therefore another experimental technique has been developed which has shown the generation of nuclear particles in each of twenty five consecutive electrolysis experiments using heavy or light water solutions of lithium salts. The damage trails caused by the nuclear particles are made visible by etching in hot concentrated caustic solution, and the electrolysis experiments are accompanied by suitable blank, or control, experiments. The damage trails begin either at the surface of the CR39 chip that faces toward the electrolyte, at the opposite surface, or totally within the 0.83 mm thickness of the plastic detectors. It is demonstrated that the nuclear damage trails could not have been caused by ordinary radionuclides contaminating anything involved in the experimental procedure. The described phenomena pose a formidable challenge to nuclear theory.