Probabilistic Models to Predict the Growth Initiation Time for Pseudomonas spp. in Processed Meats Formulated with NaCl and NaNO

نویسندگان

  • Hyunji Jo
  • Beomyoung Park
  • Mihwa Oh
  • Eunji Gwak
  • Heeyoung Lee
  • Soomin Lee
  • Yohan Yoon
چکیده

This study developed probabilistic models to determine the initiation time of growth of Pseudomonas spp. in combinations with NaNO 2 and NaCl concentrations during storage at different temperatures. The combination of 8 NaCl concentrations (0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, and 1.75%) and 9 NaNO 2 concentrations (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm) were prepared in a nutrient broth. The medium was placed in the wells of 96-well microtiter plates, followed by inoculation of a five-strain mixture of Pseudomonas in each well. All microtiter plates were incubated at 4, 7, 10, 12, and 15C for 528, 504, 504, 360 and 144 h, respectively. Growth (growth initiation; GI) or no growth was then determined by turbidity every 24 h. These growth response data were analyzed by a logistic regression to produce growth/no growth interface of Pseudomonas spp. and to calculate GI time. NaCl and NaNO 2 were significantly effective (p<0.05) on inhibiting Pseudomonas spp. growth when stored at 4-12C. The developed model showed that at lower NaCl concentration, higher NaNO 2 level was required to inhibit Pseudomonas growth at 4-12C. However, at 15C, there was no significant effect of NaCl and NaNO 2 . The model overestimated GI times by 58.2±17.5 to 79.4±11%. These results indicate that the probabilistic models developed in this study should be useful in calculating the GI times of Pseudomonas spp. in combination with NaCl and NaNO 2 concentrations, considering the over-prediction percentage.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Probabilistic Models to Predict the Growth Initiation Time for Pseudomonas spp. in Processed Meats Formulated with NaCl and NaNO2

This study developed probabilistic models to determine the initiation time of growth of Pseudomonas spp. in combinations with NaNO2 and NaCl concentrations during storage at different temperatures. The combination of 8 NaCl concentrations (0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, and 1.75%) and 9 NaNO2 concentrations (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm) were prepared in a nutrient broth. The ...

متن کامل

Growth limits of Staphylococcus aureus as a function of temperature, acetic acid, NaCl concentration, and inoculum level

Staphylococcus aureus is one of the most prevalent causes of gastroenteritis worldwide. Knowing the precise boundary for the growth/no growth interface of S. aureus and also determining the period of time needed for bacterial growth initiation is necessary for food safety risk assessment. This study was designed to examine the combined effects of temperature, acetic acid, inoculum level and NaC...

متن کامل

Evaluation of Salmonella Growth at Low Concentrations of NaNO2 and NaCl in Processed Meat Products Using Probabilistic Model

This study developed probabilistic models to predict Salmonella growth in processed meat products formulated with varying concentrations of NaCl and NaNO2. A five-strain mixture of Salmonella was inoculated in nutrient broth supplemented with NaCl (0%, 0.25%, 0.5%, 0.75%, 0.5%, 1.0%, 1.25%, and 1.75%) and NaNO2 (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm). The inoculated samples were then incu...

متن کامل

Identification of bovine, ovine and caprine pure and binary mixtures of raw and heat processed meats using species specific size markers targeting mitochondrial genome

A specific polymerase chain reaction (PCR) method was applied for identification of bovine (Bos taurus), ovine (Ovis aries) and caprine (Capra hircus) pure and binary mixtures of raw and heat-processed meats. These meats are used in food industry products and/or for direct consumption of consumers. The mitochondrial DNA was amplified as a template in a PCR reaction by use of specific primers re...

متن کامل

FINITE ELEMENT PREDICTION OF DUCTILE FRACTURE IN AUTOMOTIVE PANEL FORMING: COMPARISON BETWEEN FLD AND LEMAITRE DAMAGE MODELS

In sheet metal forming processes with complex strain paths, a part is subjected to large plastic deformation. This severe plastic deformation leads to high plastic strain localization zones and subsequent accumulation of those strains. Then internal and superficial micro-defects and in other words ductile damage is created. This damage causes quality problems such as fracture. Therefore, design...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014