Construction equipment and motor vehicle related injuries on construction sites in Turkey.

نویسندگان

  • G Emre Gürcanli
  • Ugur Müngen
  • Murat Akad
چکیده

Research on occupational accidents on construction sites in Turkey is very few. Moreover, research on motor vehicle and equipment accidents also do not exist. Investigation in the scope of this study shows that after falls and contact with electricity, accidents involving heavy equipment and motor vehicles rank third and fourth, respectively. This study aims to reveal the characteristics of these types of accidents, deduct the prominent causes that lead to fatalities as well as permanent disabilities using the present data. With the aid of obtained results, recommendations are made for safety experts on how to derive data from insufficient sources in Turkey and to evaluate these data for prevention and mitigation of the risks that construction workers are exposed to. 168 fatal and 38 non-fatal traffic accident-caused incidents as well as 206 fatal and 97 non-fatal construction equipment accidents, which were selected from official statistics and expert reports, were taken into consideration. Analysis and classification of these accidents were done according to the way they happened, the type of construction site and the occupation of the victims. Moreover, the leading causes of fatal and non-fatal injuries, to which drivers, operators and co-operators are exposed, are presented. Critical findings concerning prominent ways of occurrence, type of construction work and occupation are presented; and a number of measures for reducing the present risks are suggested. Some approaches for analysing relevant data are proposed for further research.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Path analysis of occupational injuries based on the structural equation modeling approach: a retrospective study in the construction industry

Background and aims: The construction industry, sites, and projects are the most dangerous industries in terms of the risk of occupational accidents and injuries. Important factors that have led the industry as a health, safety, environment (HSE) high-risk industry in the world can be cited such as continuous changes in construction projects, using a lot of resources, poor working conditions,...

متن کامل

Factors affecting occupational accidents in the construction industry (2009-2013)

Background: There is a high prevalence of  occupational injuries due to accidents in construction industries which affect human health. Therefore, the exploration and analysis of contributing factors of such accidents can lead to their prevention and the reduction of their consequences. This study was conducted with the aim to identify factors related to occup...

متن کامل

Factors associated with the severity of fatal accidents in construction workers

  Background: Construction work (building houses, roads, workplaces, and repairing and maintaining infrastructures) is a dangerous land-based job. This includes many hazardous tasks and conditions such as working at the following conditions: Height, excavation, noise, dust, power tools and equipment. Construction work has been increased in developed and underdeveloped countries ove...

متن کامل

Cause-Consequence Modeling of Occupational Accidents in Construction Sites: A Retrospective Study in Iran

Introduction: Nearly half of occupational accidents in Iran occur in construction sites. Therefore, modeling of occupational accidents in these sites is one of the solutions to design safety strategies to reduce occupational accidents in the field of construction. This study was designed and conducted with the aim of modeling the cause-consequence of accidents in construction sites. Material a...

متن کامل

مطالعه حوادث شغلی ناتوان‌کننده در صنعت ساخت‌وساز طی دوره دو ساله

 Background & Objectives : Idnetifying causes of occupational accidents is a key issue to prevent these accidents. The present study aimed to identify and analyze debilitating accidents in the construction industry during a two-year period ( 2010 - 2011 years) .  Methods: This was an analytical cross-sectional study. The study data included information about all debilitating accid...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Industrial health

دوره 46 4  شماره 

صفحات  -

تاریخ انتشار 2008