Thermomechanical Stress Analysis of Multi - Layered Electronic Packaging
نویسندگان
چکیده
An accurate estimate of thermal stresses in multilayered microelectronics structures along the bonded interfaces is crucial for design and prediction of delamination-related failures. Compared with a numerical method, analytical closed-form solution can offer a more rapid method to obtain the stresses at the interfaces. An analytical model for ply-level sub-laminate analysis is investigated in this paper. The theory presented treats each layer as a beam-type plate with orthotropic material properties. As an example, the results are shown for a three-layer beam problem with special orthotropic material properties. Analytical model results are compared with the finite element analysis results, as a first order approximation. @DOI: 10.1115/1.1535446#
منابع مشابه
Mesh Sensitivity and FEA for Multi-Layered Electronic Packaging
Multi-layered stacks are commonly used in microelectronic packaging. Traditionally, these systems are designed using linear-elastic analysis either with analytical solutions or finite element method. Linear-elastic analysis for layered structures yields very conservative results due to stress singularity at the free edge. In this paper, it is shown that a damage mechanics based nonlinear analys...
متن کاملThermal and Thermomechanical Analysis and Testing of Electronic Packaging Systems
A comprehensive thermal and mechanical modeling and experimentation program in advanced packaging has led to the systematic thermomechanical analysis of very large scale integrated device packages, board-level structures, and surface-mounted electronic systems. Model validation and analytical results have been correlated with data from extensive experimental testing, and new techniques have bee...
متن کاملThermal stress analysis of multi-layer thin films and coatings by an advanced boundary element method
An advanced boundary element method (BEM) is developed in this paper for analyzing thin layered structures, such as thin films and coatings, under the thermal loading. The boundary integral equation (BIE) formulation for steady-state thermoelasticity is reviewed and a special case, that is, the BIE for a uniform distribution of the temperature change, is presented. The new nearly-singular integ...
متن کاملThermomechanical Analysis of Electronic Package Using Finite Element Method
This paper deals with the simulation of power electronic components. More precisely it is focused on the modeling approach to emphasize the electro-thermomechanical behavior of materials in power electronics assembly (electronic package). Thermal strains and Stresses constitute an important part of the design considerations for many practical engineering problems. They become especially critica...
متن کاملThermomechanical Finite Element Analysis of Problems in Electronic Packaging Using the Disturbed State Concept: Part 1 Theory and Formulation
Accurate prediction of the thermomechanical cyclic behavior of joints and interfaces in semiconductor devices is essential for their reliable design. In order to understand and predict the behavior of such interfaces there is a need for improved and unified constitutive models that can include elastic, inelastic, viscous, and temperature dependent microstructural behavior. Furthermore, such uni...
متن کامل