IV . D . 1 Design of Novel Multi - Component Metal Hydride - Based Mixtures for Hydrogen Storage
نویسندگان
چکیده
Determine storage capacities, kinetics, and reversibility • for reactions predicted to have high capacity and suitable thermodynamics for H2 storage applications, i.e., 2LiBH4 + 5Mg(BH4)2 and B20H16. Use combined theory and experiment to characterize • reaction products from 2LiBH4 + 5Mg(BH4)2. Synthesize B • 20H16 and determine hydrogen desorption properties and reaction products. Develop computational methods to extend calculation of • kinetics beyond mass transport to predict dissociation, surface diffusion, and other kinetic barriers.
منابع مشابه
PERFORMANCE OF AB, ALLOYS FOR HYDROGEN STORAGE AND HYDRIDE ELECTRODES
Two types of hydride electxodes are potential candidates to replace the Cd elecsode in NilCd batteries, One is of the A type where A is a rare earth metal or mixture thereof, and B is the transition metal. The other is commonly referred to as A type. A , type alloys with partial substitution of the B element in A type hydride material (Ovonic) with Co, Mn, Al, and Fe were studied (A compo...
متن کاملEnhanced heat exchanger design for hydrogen storage using high-pressure metal hydride: Part 1. Design methodology and computational results
0017-9310/$ see front matter 2010 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2010.09.029 ⇑ Corresponding author. Tel.: +1 765 494 5705; fax E-mail address: [email protected] (I. Mud This study explores the use of a high-pressure metal hydride (HPMH), Ti1.1CrMn, to store hydrogen at high pressures (up to 310 bar) and temperatures below 60 C, conditions that are suitable for automobile...
متن کاملThermal conductivity and specific heat measurements of metal hydrides
There are extensive efforts underway worldwide to develop inexpensive and practical hydrogen storage materials for the implementation of a hydrogen-based energy economy. Metal hydrides are leading candidates for hydrogen storage applications because they are solid at room temperature and release hydrogen on demand when heated. HSM systems Inc. has developed a practical hydrogen storage system i...
متن کاملExperimental investigation and theoretical modeling of dehydriding process in high-pressure metal hydride hydrogen storage systems
This study explores the endothermic dehydriding (desorption) reaction that takes place in a high-pressure metal hydride (HPMH) hydrogen storage system when hydrogen gas is released to the fuel cell. The reaction is sustained by circulating warm fluid through a heat exchanger embedded in the HPMH powder. A systematic approach to modeling the dehydriding process is presented, which is validated a...
متن کاملConsiderations on the H2 desorption process for a combination reactor based on metal and complex hydrides
Hydrogen storage systems based on the combination reactor concept are promising for application of future complex hydride materials with high storage capacities and low reaction kinetics at moderate operating temperatures. In such a reactor, a fast reacting metal hydride is added to a complex hydride material in a separate compartment of the tank combining the advantages of the high storage cap...
متن کامل