Identification of Multi-cracks in the Gate Rotor Shaft Based on the Wavelet Finite Element Method
نویسنده
چکیده
In order to have fault identification for the gate rotor shaft with multiple cracks effectively, the quantity identification method of the gate rotor shaft with multiple cracks based on wavelet finite element method is established and the frequency test of the gate rotor shaft based on blind source separation algorithm is analyzed. Firstly the wavelet finite element was established by combining the Daubechies wavelet theory and the traditional finite element theory and then the vibration equations of intact and cracked wavelet finite element were obtained, which were applied to compute the changing rate of the natural frequencies for the cracked gate rotor shaft. Then natural frequencies fitting curve surface of the cracked gate rotor shaft with were acquired based on the wavelet finite element method and the identification procedure of the cracks was confirmed and the gate rotor shaft with two different cracks was analyzed and the results showed that the wavelet finite element could predict the multi-cracks correctly.
منابع مشابه
Using Pattern Search Algorithm and Finite Element Method to Detect Rotor Cracks
The vibration pattern of a rotor system reflects the mechanical parameter changes in the system. Hence, the use of vibration monitoring is considered as a possible means of detecting the presence and growth of the cracks. In this paper, a pattern search based method for shaft crack detection is proposed and described which formulates the shaft crack detection as an optimization problem by means...
متن کاملMultiple Crack Identification Using Frequency Measurement
This paper presents a method to detect multiple cracks based on frequency information. When a structure is subjected to dynamic or static loads, cracks may develop and the modal frequencies of the cracked structure may change. To detect cracks in a structure, we construct a high precision wavelet finite element (EF) model of a certain structure using the B-spline wavelet on the interval (BSWI)....
متن کاملANN-Based Crack Identification in Rotor System with Multi-Crack in Shaft
Rotating machinery, such as steam turbo, compressor, and aeroengine etc., are widely used in many industrial fields. Among the important rotor faults, the fatigue crack fault, which can lead to catastrophic failure and cause injuries and severe damage to machinery if undetected in its early stages, is most difficult to detect efficiently with traditional methods. In the paper, based on the trut...
متن کاملExperimental and finite-element free vibration analysis and artificial neural network based on multi-crack diagnosis of non-uniform cross-section beam
Crack identification is a very important issue in mechanical systems, because it is a damage that if develops may cause catastrophic failure. In the first part of this research, modal analysis of a multi-cracked variable cross-section beam is done using finite element method. Then, the obtained results are validated usingthe results of experimental modal analysis tests. In the next part, a nove...
متن کاملA Novel Finite-Element-Based Algorithm for Damage Detection in the Pressure Vessels Using the Wavelet Approach
In this investigation a suitable algorithm for the detection of cracks in the pressure vessels is presented. The equations of motion for the vessel are obtained and transferred into the wavelet space in a simplified form resulted from time and position approximations. The locations of cracks are randomly distributed in different regions of the structure to cover the whole geometry of the pressu...
متن کامل