Collector Material Desorption Tests ’ A

نویسنده

  • CHARLES K. SINCLAIR
چکیده

To obtain long cathode lifetimea, the surface of the spent beam collector for the photocathode RF power source (called the Lasertron) must have a low coefficient of darorption of gas moleculea by electrons. We uuxmbled a low voltage (5 10 kV) ultrahigh vacuum electron gun md target system to measure the desorption rates of CO and COz under conditions where the power density, charge density and pressure were the mme order as expected in the lasertron. Coppu coated with a thii layer of a nonevaporable getter (NEC) was found to have a coefficient of desorption of COz (CO) at least 30 (5) t imes less than vacuum degazsed high grade OFHC copper. The NEG material may be coated on the usual collector geometries and therefore can substantially reduce operating tube pressure in conventional klystron and other high current tuben.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

EFFECT OF SiC ADDITION ON HYDROGEN DESORPTION PROPERTIES OF NANOCRYSTALLINE MgH2 SYNTESIZED BY MECHANICAL ALLOYING

In this study, the composite material with composition of MgH2-5 wt% SiC has been prepared by co-milling of MgH2 with SiC powder. The effect of milling time and additive on MgH2 structure, i.e. crystallite size, lattice strain, particle size and specific surface area, and also hydrogen desorption properties of obtained composite was evaluated by thermal analyzer method and compared with pure un...

متن کامل

Effect of Milling Time on Hydrogen Desorption Properties of Nanocrystalline MgH2

Nanocrystalline magnesium hydride powder was synthesized by mechanical milling of MgH2 in a planetary ball mill for various times. The effect of MgH2 structure, i.e. crystallite size, lattice strain, particle size and specific surface area on the hydrogen desorption properties was investigated. A single peak of hydrogen desorption was observed for as-received powder, exhibiting an average parti...

متن کامل

Experimental Study on Heat Transfer Performance of Vacuum Tube Heat Collector with Thermal Storage

This experimental study is intended to explore the heat performance of a novel vacuum tube heat collector with thermal storage. In order to enhance the heat transfer performance, we add radial metal fins to the U-tube which is used as the heat transfer channel of water. Meanwhile, in order to increase the thermal capacity of the heat collector, the heat collector model is designed to be larger ...

متن کامل

Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries

In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...

متن کامل

An experimental investigation of performance of a 3-D solar conical collector at different flow rates

The shape of a solar collector is an important factor in solar-to-thermal energy conversion. Conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. Flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. The present study is an experimentally investigated of the performance of the solar coni...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998