Unbalanced Cylindrical Magnetron for Accelerating Cavities Coating
ثبت نشده
چکیده
منابع مشابه
Magnetron sputtering: a review of recent developments and applications
Magnetron sputtering has become the process of choice for the deposition of a wide range of industrially important coatings. Examples include hard, wear-resistant coatings, low friction coatings, corrosion resistant coatings, decorative coatings and coatings with speci"c optical, or electrical properties. Although the basic sputtering process has been known and used for many years, it is the de...
متن کاملNew Methods for Thin Film Deposition and First Investigations of the use of High Temperature Superconductors for Thin Film Cavities
Niobium thin film cavities have shown good and reliable performance for LEP and LHC, although there are limitations to overcome if this technique should be used for new accelerators such as the ILC. New coating techniques like High Power Impulse Magnetron Sputtering (HiPIMS) has shown very promising results and we will report on its possible improvements for Nb thin film cavity performance. Cur...
متن کامل2D PIC Simulation of the DC Discharge in Cylindrical Magnetron
PIC method of plasma simulation is widely used in plasma physics research because of its ability to solve wide range of problems in kinetic approach. Regarding to description of PIC method we refer to [Birdsall et al., 1995]. This work is focused on PIC simulations of dc discharge in cylindrical magnetron device. Magnetrons are used in industry e.g. for thin film layer coating and etching. Many...
متن کاملDecorative Titanium Nitride Colored Coatings on Bell-Metal by Reactive Cylindrical Magnetron Sputtering
The transition metal nitrides like titanium nitride exhibit very interesting color variation properties depending on the different plasma deposition conditions using cylindrical magnetron sputtering method. It is found in this deposition study that nitrogen partial pressure in the reactive gas discharge environment plays a significant role on the color variation of the film coatings on bell-met...
متن کاملSuperconducting Coatings for Accelerating Rf Cavities: Past, Present, Future
About 200 superconducting RF accelerating cavities of 352 MHz frequency, each consisting of four cells, are required to upgrade the LEP energy from an initial value of 55 GeV to about 90 GeV. About 170 of these cavities, which have already been ordered from European industry, will be made of copper and coated internally with a thin layer of niobium. The coating will be carried out by sputtering...
متن کامل