Upgrade Recycling of Cast Iron Scrap Chips towards β-FeSi2 Thermoelectric Materials

نویسندگان

  • Assayidatul Laila
  • Makoto Nanko
  • Masatoshi Takeda
چکیده

The upgrade recycling of cast-iron scrap chips towards β-FeSi₂ thermoelectric materials is proposed as an eco-friendly and cost-effective production process. By using scrap waste from the machining process of cast-iron components, the material cost to fabricate β-FeSi₂ is reduced and the industrial waste is recycled. In this study, β-FeSi₂ specimens obtained from cast iron scrap chips were prepared both in the undoped form and doped with Al and Co elements. The maximum figure of merit (ZT) indicated a thermoelectric performance of approximately 70% in p-type samples and nearly 90% in n-type samples compared to β-FeSi₂ prepared from pure Fe and other published studies. The use of cast iron scrap chips to produce β-FeSi₂ shows promise as an eco-friendly and cost-effective production process for thermoelectric materials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Scrap Iron and Steel Recycling in Nigeria

Nigeria is blessed with abundant iron ore deposits of nearly 3 billion tonnes and other basic minerals for steel production including coal and limestone. Yet the Nigerian steel sector has collapsed principally due to shortage of raw materials particularly iron ore for the integrated steel plants and billets for the rolling mills. The privatization of the steel sector that was done in 2004-2005 ...

متن کامل

Photoluminescence Properties of β-FeSi2 on Cu- or Au-coated Si

The photoluminescence (PL) at 1.55 μm from semiconducting β-FeSi2 has attracted a noticeable interest for silicon-based optoelectronic applications. Moreover, its high optical absorption coefficient (higher than 10 cm above 1.0 eV) allows this semiconducting material to be used as photovoltanics devices. A clear PL spectrum for β-FeSi2 was observed by Cu or Au coating on Si(001). High-crystal-q...

متن کامل

Building Scrap Based Industries; The Potential for Economic Development and Environmental Improvement in the Gaza Strip by

Scrap based manufacturing can be an effective economic development tool. The feedstocks for these industries are cheap, locally generated and sustainable, capital costs are low, jobs are plentiful, and the end products are competitive. There are other important environmental spinoffs that result from relying on secondary versus virgin materials: depletion of natural resources including water an...

متن کامل

Spark Plasma Sintering As a Solid-State Recycling Technique: The Case of Aluminum Alloy Scrap Consolidation

Recently, "meltless" recycling techniques have been presented for the light metals category, targeting both energy and material savings by bypassing the final recycling step of remelting. In this context, the use of spark plasma sintering (SPS) is proposed in this paper as a novel solid-state recycling technique. The objective is two-fold: (I) to prove the technical feasibility of this approach...

متن کامل

Strategies For Aluminum Recycling: Insights From Material System Optimization

level, the primary decisions for a remelter involve composing alloy batches by carefully selecting and mixing various amounts of scrap and primary materials. Sorting provides added flexibility as well as complexity to these decisions by affording the secondary processor the opportunity to upgrade the materials which they have at hand. With sorting, the set of operational decisions include what ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2014