Mixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
نویسندگان
چکیده
In this work, a fully tin-based, mixed-organic-cation perovskite absorber (FA) x (MA)1-x SnI3 (FA = NH2CH = NH2+, MA = CH3NH3+) for lead-free perovskite solar cells (PSCs) with inverted structure is presented. By optimizing the ratio of FA and MA cations, a maximum power conversion efficiency of 8.12% is achieved for the (FA)0.75(MA)0.25SnI3-based device along with a high open-circuit voltage of 0.61 V, which originates from improved perovskite film morphology and inhibits recombination process in the device. The cation-mixing approach proves to be a facile method for the efficiency enhancement of tin-based PSCs.
منابع مشابه
Lead-free solid-state organic–inorganic halide perovskite solar cells
Lead-free solution-processed solid-state photovoltaic devices based on methylammonium tin iodide (CH3NH3SnI3) perovskite semiconductor as the light harvester are reported. Featuring an optical bandgap of 1.3 eV, the CH3NH3SnI3 perovskite material can be incorporated into devices with the organic hole-transport layer spiro-OMeTAD and show an absorption onset at 950 nm, which is significantly red...
متن کاملBication lead iodide 2D perovskite component to stabilize inorganic a-CsPbI3 perovskite phase for high-efficiency solar cells
Among various all-inorganic halide perovskites exhibiting better stability than organic-inorganic halide perovskites, a-CsPbI3with themost suitable band gap for tandem solar cell application faces an issue of phase instability under ambient conditions. We discovered that a small amount of two-dimensional (2D) EDAPbI4 perovskite containing the ethylenediamine (EDA) cation stabilizes the a-CsPbI3...
متن کاملOptimization of Lead-free Organic–inorganic Tin(II) Halide Perovskite Semiconductors by Scanning Electrochemical Microscopy
Lead-free organic-inorganic tin halide perovskites were prepared and investigated by a rapid screening technique utilizing a modified scanning electrochemical microscope (SECM). We studied liquid junction photoelectrochemical (PEC) solar cells based on p-type methylammonium tin halide (MASnI3-xBrx) perovskites employing the benzoquinone (BQ) redox couple, BQ/BQ , in dichloromethane (CH2Cl2). We...
متن کاملBand Gap Tuning via Lattice Contraction and Octahedral Tilting in Perovskite Materials for Photovoltaics.
Tin and lead iodide perovskite semiconductors of the composition AMX3, where M is a metal and X is a halide, are leading candidates for high efficiency low cost tandem photovoltaics, in part because they have band gaps that can be tuned over a wide range by compositional substitution. We experimentally identify two competing mechanisms through which the A-site cation influences the band gap of ...
متن کاملEnhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI3
Perovskite solar cells have revolutionized the fabrication of solution-processable solar cells. The presence of lead in the devices makes this technology less attractive, and alternative metals in perovskites are being researched as suitable alternatives. We demonstrate a new type of tin-based perovskite absorber that incorporates both ethylenediammonium (en) and formamidinium (FA), forming new...
متن کامل