Mitigation of voltage sag/swell using Dynamic voltage restorer (DVR)

نویسندگان

  • Sanjay Haribhai Chaudhary
  • Gaurav gangil
چکیده

The most noticeable topic for electrical engineering is power quality in recent year. Power quality problem is an occurrence manifested as a nonstandard voltage, current or frequency. Utility distribution networks, sensitive industrial load and critical commercial operation suffer from various types of outages and service interruption can cost significant financial losses. One of the major problems dealt here is the voltage sag. With the fast development in power electronics technology have made it possible to mitigate power quality problems. This work concentrates on the power quality problem such as voltage sag. Many of the devices such as STATCOM, tap changing transformer, UPFC and DVR are available to mitigate voltage sag problems. Among these, dynamic voltage restorer can provide the most commercial solution to mitigate voltage sag by injecting voltage as well as power in to the system. Dynamic Voltage Restorer is a series connected power electronics based device that can quickly mitigate the voltage sag in the system and restore the load voltage to the pre-fault value. This thesis first gives an introduction to relevant power quality problems for a DVR and power electronics controllers for voltage sag mitigation. Thereafter the operation and elements in DVR is described. In this thesis proposed utilizes the error signal to control the triggering of the switches of an inverter using Sinusoidal Pulse Width Modulation (SPWM) technique. Modeling and simulation of proposed DVR is implemented in MATLAB SIMULINK  Dynamic voltage restorer (DVR): It is a voltage source converter which is connected in series with supply through injection transformer where voltage sag or swell takes place. The DVR is most technically advanced and economical device for voltage sag mitigation in distribution system. Energy storage in DVR is responsible for supplying active power needed during voltage sag. If this energy is obtained from neighbour feeder than it is called interline dynamic voltage restorer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Voltage Sag and Swell Mitigation Using Matrix Converter with Reduced Number of Switches

-----------------------------------------------------------ABSTRACT----------------------------------------------------Dynamic Voltage Restorer (DVR) is used in power distribution system to protect sensitive loads in voltage disturbances. The performance of DVR is related to the adopted configuration and control strategy used for inverters. In this paper, matrix converter with reduced number of...

متن کامل

Mitigation Technique For Voltage Sag & Swell By Using Dynamic Voltage Restorer

This paper presents the application of dynamic voltage restorers (DVR) on power distribution Systems for mitigation of voltage sags/swells at critical loads. DVR is one of the compensating types of custom power devices. An adequate modeling and simulation of DVR, including controls in MATLAB, show the flexibility and easiness of the MATLAB environment in studying and Understanding such compensa...

متن کامل

Mitigation of voltage SAG/SWELL Using Capacitor Clamped Multilevel Inverter with Phase Disposition Pulse Width Modulation (PDPWM)

Voltage Sag is one of the Power Quality problem and it become severe to industrial customers. Voltage sag causes miss operation to several sensitive equipments. This problem can be mitigating with the Dynamic Voltage Restorer. DVR is a solid state device which is connected in series between the source and load voltages. In this Dynamic Voltage Restorer is implemented using Capacitor Clamped Mul...

متن کامل

Modeling and Simulation of Multi Layer Feed Forward Neural Network Controller Based Dynamic Voltage Restorer for Voltage Sag Mitigation

Voltage Sag/Swell are the most important Power quality issues which occur due to the utilization of increased number of sophisticated loads in Industrial and Electrical distribution system. Now-adays Industrial loads are generally based on Power electronic devices which are very sensitive to voltage disturbances. Hence it is mandatory to provide high quality power supply since; failures due to ...

متن کامل

DVR Control Strategy for Dynamic Power Quality Disturbance Mitigation

AbstractThe dynamic voltage restorer (DVR) is a series connected device for mitigating voltage sag/This paper presents with feed forward pre-sag/swell voltage control method to regulate the output voltage of pulse width modulated (PWM) voltage source converter (VSC). The proposed controller maintains a constant load voltage under the multiple balanced/unbalanced dynamic PQ disturbances. The pro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013