[Titanium, a target for progress in dental casting].
نویسندگان
چکیده
チ タ ンとい う金属 元 素 が発 見 され た の は今 か ら 200年 も前 の こ とに な るが,金 属 チ タ ンが 工 業 的 に 生 産 され る よ うに な って,人 類 の生 活 に役 に立 ち 始 め た の は,第 二 次 世 界 大 戦 後 の こ とで あ る。 チ タ ンが 初 め て 歯科 材 料 と して応 用 され た の は, わ れ わ れ の 知 る範 囲 で は,1968年 に西 ドイ ツの ク ル ップ社 に お い て 開 発 され た チ タン 入 りコバ ル ト ク ロム合 金 クル タ ニ ウ ムで,そ の後,純 チ タ ンを は じめとして各種チタン合金が歯科に導入され, 人工歯根や下顎再建などのインプラント用材料, 矯正用 ワイヤー,支 台築造用 のポス ト,イ ンレ ,ク ラウンブリッジか ら金属床,さ らには抜歯 用のエレベーターなどにも使われるようになって きた。 このように,歯 科におけるチタンの利用が近年 にわかに盛んになった理由には,チ タンが多くの 優れた特性をもっていることがあげ られる。特に チタンの生体に対する親和性がきわめて優れてい ることと,い わゆるハイテク材料とか先端技術の 流行 といった社会の大きな流れの影響も無視でき ないと思われる。 チタンには数々の優れた性質がある反面,鋳 造 には全 く適さない金属であるともいえる。チタン の鋳造がなぜ難 しいか,ま た現在までにどの程度 問題が解決されたかなどを中心に述べるが,誌 面 の都合でチタン合金については省略 し,純 チタン の鋳造だけを取 りあげたい。 表1に は,チ タンの性質の中で鋳造に関係する ものを示 した。 最初はチタンの融点で,文 献によって多少異な るが,1988年 度の理科年表によれば,1,675°C で, 純金より約610°C 高い。 これは,こ れまでの歯科 鋳造では体験していない温度で,超 高温鋳造 とし
منابع مشابه
Casting of Titanium Alloys for Dental Applications
In dentistry, gold-based noble metal alloys have traditionally been cast into various types of dental prostheses, such as partial dentures, crowns, and bridges. More recently, less expensive dental alloys with base-metal elements, such as Co-Cr and Ni-Cr, have been used. Titanium is considered to be an attractive alternative to these traditional dental alloys because of its remarkable lack of t...
متن کاملDental Titanium Casting Researches in China
Titanium is an ideal material for use in prosthodontics because of its biocompatibility, corrosion resistance, and mechanical strength combined with its lightweight. Recently the use of titanium and titanium alloys for fixed restorations has increased substantially, mainly due to the improvement of techniques for the casting titanium and its alloys. This article reviewed the studies on titanium...
متن کاملEffect of magnesia investments in the dental casting of pure titanium or titanium alloys.
For past several years, precious alloys have been gradually replaced by non-precious ones in the dental casting field because of the rising price of dental alloys. In Japan during the past ten years, nickel-chromium alloys have been used extensively for crown or bridge and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same all over the wor...
متن کاملAn experimental model for the assessment of titanium denture casting techniques.
In order to establish the most suitable technique for the construction of cast titanium denture frames, an experimental model was developed for the quantification of casting success. A relatively large wax pattern (36 x 29 x 0.9 mm) was prepared from a grid sheet used for the construction of cast cobalt chromium partial denture frames. The pattern consisted of 100 circles and the number of comp...
متن کاملDimensional accuracy and surface property of titanium casting using gypsum-bonded alumina investment.
The aim of the present study was to evaluate the dimensional accuracy and surface property of titanium casting obtained using a gypsum-bonded alumina investment. The experimental gypsum-bonded alumina investment with 20 mass% gypsum content mixed with 2 mass% potassium sulfate was used for five cp titanium castings and three Cu-Zn alloy castings. The accuracy, surface roughness (Ra), and reacti...
متن کاملDENTAL CASTiNG OF TITANIUM
and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same a]1 over the world, However, the expanded use of nickel-containing base metal alloys in dentistry has raised questions concerning their biological s fety, namely, carcinogenic and sensitivity risks.i) On the other hand, since pure titanium or titanium-based alloys have excellent biocom...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Kokubyo Gakkai zasshi. The Journal of the Stomatological Society, Japan
دوره 56 1 شماره
صفحات -
تاریخ انتشار 1989