Finite Element Modelling and Simulation of Chip Breaking with Grooved Tool
نویسنده
چکیده
A finite element model is presented to simulate chip breaking when orthogonal turning medium carbon steel with a grooved cutting tool is used. The chip formation, chip breaking, cutting force, stress, strain and temperature are simulated by the thermo-elastic-plastic finite element method, using commercial finite element software. The cutting process is simulated from the initial to the steady-state of cutting force, and then to periodic fractures of machined chip, by incrementally advancing the cutting tool. Normalized Cockcroft & Latham’s criterion is employed to predict the effect of tensile stress on chip fracture. The cutting force and bending moment are analysed to explain the mechanism of chip breaking. Experiments on the application of the grooved cutting tool were performed. The simulated broken chip profile and cutting force compare well with experimental observations that the established FE model is capable of capturing the overall trend of the experimental results. (Received in January 2013, accepted in May 2013. This paper was with the authors 2 months for 1 revision.)
منابع مشابه
Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation”
The main aim of this paper is to study the material removal phenomenon using the finite element method (FEM) analysis for orthogonal cutting, and the impact of cutting speed variation on the chip formation, stress and plastic deformation. We have explored different constitutive models describing the tool-workpiece interaction. The Johnson-Cook constitutive model with damage initiation and damag...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملشبیهسازی المان محدود فرایند برش متعامد و تعیین ضخامت لایه چسبنده به ابزار در ناحیه دوم برش
The built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. The built up layer (BUL) is formed in second deformation zone near the tool-chip interface in the back of the chip. This parameter influences the tool life and machined surface quality. This BUL should not be confused with the built up edge (BUE). The deformation of the BUL in...
متن کاملA two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis
Finite element method (FEM) is one of the most famous methods which has many applications in varies studies such as the study of crack propagation in engineering structures. However, unless extremely fine meshes are employed, problem arises in accurately modelling the singular stress field in the singular element area around the crack tip. In the present study, the crack growth simulation has b...
متن کاملEvaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method
This paper presents a technique to evaluate the fracture parameters by combining the edge based smoothed finite element method (ESFEM) and the scaled boundary finite element method (SBFEM). A semi-analytical solution is sought in the region close to the vicinity of the crack tip using the SBFEM, whilst, the ESFEM is used for the rest of the domain. As both methods satisfy the partition of unity...
متن کامل