Highly photosensitive polymethyl methacrylate microstructured polymer optical fiber with doped core.
نویسندگان
چکیده
In this Letter, we report the fabrication of a highly photosensitive, microstructured polymer optical fiber using benzyl dimethyl ketal as a dopant, as well as the inscription of a fiber Bragg grating in the fiber. A refractive index change in the core of at least 3.2×10(-4) has been achieved, providing a grating with a strong transmission rejection of -23 dB with an inscription time of only 13 min. The fabrication method has a big advantage compared to doping step index fiber since it enables doping of the fiber without using extra dopants to compensate for the index reduction in the core introduced by the photosensitive agent.
منابع مشابه
Angle dependent Fiber Bragg grating inscription in microstructured polymer optical fibers.
We report on an incidence angle influence on inscription of the Fiber Bragg Gratings in Polymethyl methacrylate (PMMA) microstructured polymer optical fibers. We have shown experimentally that there is a strong preference of certain angles, labeled ГK, over the other ones. Angles close to ГK showed fast start of inscription, rapid inscription and stronger gratings. We have also shown that grati...
متن کاملDispersion-modulation by high material loss in microstructured polymer optical fibers.
The influence of strong loss peaks on the dispersion (through the Kramers-Kronig relations) of a nonlinear waveguide is investigated theoretically. It is found specifically for degenerate four-wave mixing in a poly(methyl methacrylate) microstructured polymer optical fiber that the loss-induced dispersion significantly modifies the wavelengths for which there is phase-match. Depending on the pu...
متن کاملGraded-Index Plastic Optical Fiber with High Mechanical Properties Enabling Easy Network Installations. I
A doped poly(methyl methacrylate) (PMMA)– based graded-index plastic optical fiber (GI POF) with high mechanical strength is reported for the first time. Although the POF is generally believed to have a good mechanical flexibility even if it has a large-core diameter, such a high mechanical strength has been provided by making the polymer chains in the POF highly oriented in its axial direction...
متن کاملSelf-reconstructing all-optical poling in polymer fibers.
Self-sustained all-optical poling second-harmonic generation (SHG) experiments are conducted in single-core and multicore dye-doped poly(methyl methacrylate) optical fibers. By tuning the polarization of the fundamental beam, the SHG signal is degraded and is reconstructed spontaneously up to its initial level. We found a new situation in which the photo-induced self-organization of azo polymer...
متن کاملFabrication and characterization of polycarbonate microstructured polymer optical fibers for high-temperature-resistant fiber Bragg grating strain sensors
Here we present the fabrication of a solid-core microstructured polymer optical fiber (mPOF) made of polycarbonate (PC), and report the first experimental demonstration of a fiber Bragg grating (FBG) written in a PC optical fiber. The PC used in this work has a glass transition temperature of 145°C. We also characterize the mPOF optically and mechanically, and further test the sensitivity of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 38 19 شماره
صفحات -
تاریخ انتشار 2013