Investigation of Mechanical Properties in Polyester and Phenyl- ester Composites Reinforced With Chicken Feather Fiber
نویسنده
چکیده
The purpose of the study is to utilize the chicken feather and finding the mechanical properties of the chicken feather reinforcing with polyester and phenyl ester. The bi-directional CFF reinforced composites were produced with phenyl ester and polyester resins with fiber reinforced composites, the chicken feather fibers (CFF) were cleaned, tested to know the mechanical properties and tensile behavior. It is found that the compressive properties of the CFF reinforced composites are significantly better than the control composites, however, the tensile and the flexural properties are determine by tensile, compressive, and flexural test. The CFF reinforced composite have potential applications due to its improved behavior and structural applications. The poultry waste can be utilized and used in any engineering applications, and it will be preferred due to lowcost and superior characteristics and the most importantly it will not cause ecological and health problems.
منابع مشابه
Effect of Redmud Particulates on Mechanical Properties of BFRP Composites (TECHNICAL NOTE)
This article reports the effective usage of redmud(RM) an industrial waste ,as a novel filler in polymer matrix. The composite has been fabricated with redmud as secondary reinforcement in banana fiber reinforced polyester (BFRP) using compression molding technique. The mechanical properties such as tensile, flexural and impact strength have been studied for different fiber weight percentage, ...
متن کاملOptimization of Hardness Strengths Response of Plantain Fibres Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design
Volume fraction of fibres (A), aspect ratio of fibres (B) and fibres orientation (C) are considered as control factors in the determination of hardness strength, hardness strength of plantain fiber reinforced polyester composites (PFR P). These properties were determined for plantain empty fruit bunch (PEFB) and plantain pseudo stem (PPS). Hardness tests were conducted on the replicated samples...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کاملAccuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites
The present study introduces two quantitative parameters to compare the accuracy of ultrasonic C-scan testing and X-ray radiography methods in the damaged area detection under low-velocity impact in polymer-based composites. For this purpose, the hand lay-up technique of composite processing was employed to prepare the composite specimen. A composite specimen consisting of the glass fiber reinf...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کامل