Design of 2x2 Mimo OFDM Architecture for Fixed WIMAX

نویسنده

  • S Ganeshkumar
چکیده

Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing technology is an advanced transmission technique for wireless communication systems. In this paper, the 64 point pipeline FFT/IFFT processor is introduced for efficient implementation of OFDM architecture. The IFFT processor is used to modulate the subcarrier in transmitter section and FFT processor demodulate the subcarrier in receiver section in the architecture. Our design adopts a single-path delay feedback style requiring less memory space and reconfigurable complex constant multiplier and bit parallel multiplier used in pipeline FFT/IFFT processor, instead of using ROM’s to store twiddle factors that consuming lower power. The design of ROM-less FFT/IFFT processor is applied to OFDM architecture with different encoding and decoding techniques analysis in the IEEE 802.16d communication standard. The result shows overall architecture design using the ROM-less FFT/IFFT processor with convolutional encoding and decoding gives efficient power, area and timing specifications considerably. Keywords-MIMO, OFDM, FFT, IFFT.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Real-Time FPGA-Based Implementation of a High-Performance MIMO-OFDM Mobile WiMAX Transmitter

The Multiple Input Multiple Output (MIMO)-Orthogonal Frequency Division Multiplexing (OFDM) is considered a key technology in modern wireless-access communication systems. The IEEE 802.16e standard, also denoted as mobile WiMAX, utilizes the MIMO-OFDM technology and it was one of the first initiatives towards the roadmap of fourth generation systems. This paper presents the PHY-layer design, im...

متن کامل

Design of 2x2 Mimo OFDM Architecture for Fixed Wimax

Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing technology is an advanced transmission technique for wireless communication systems. In this paper, the 64 point pipeline FFT/IFFT processor is introduced for efficient implementation of OFDM architecture. The IFFT processor is used to modulate the subcarrier in transmitter section and FFT processor demodulate the subcarr...

متن کامل

Design A Compact Mimo Antenna For 4G Wimax Applications

MIMO antennas are a type of antennas using more than one antenna for transmission and reception of signals. The proposed 2x2 MIMO antenna having two antennas in that one antenna is horizontally polarized and another antenna is vertically polarized. The proposed antenna works on C band. The newly designed 2x2 MIMO system works on 5GHz with 250MHz-300MHz bandwidth with reduced VSWR and high gain....

متن کامل

A real-time MIMO-OFDM mobile WiMAX receiver: Architecture, design and FPGA implementation

The IEEE 802.16e-2005 standard, also denoted as mobile WiMAX, was introduced as one of the first real efforts towards the deployment of fourth generation communication systems providing fixed and mobile broadband wireless access. Mobile WiMAX supports multiple input multiple output (MIMO) antenna techniques which are considered a key technology in wireless communication systems for increasing b...

متن کامل

High Throughput of WiMAX MIMO OFDM Including Adaptive Modulation and Coding

WiMAX technology is based on the IEEE 802.16 specification of which IEEE 802.16-2004 and 802.16e amendment are Physical (PHY) layer specifications. IEEE 802.16-2004 currently supports several multiple-antenna options including Space-Time Codes (STC), Multiple-Input Multiple-Output (MIMO) antenna systems and Adaptive Antenna Systems (AAS). The most recent WiMAX standard (802.16e) supports broadb...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014