Composite Fibers from Recycled Plastics Using Melt Centrifugal Spinning
نویسندگان
چکیده
New methods are being developed to enable the production of value-added materials from high-volume, low-cost feedstocks arising from domestic recycling streams. In this work, recycled bottle-grade polyethylene terephthalate, polystyrene, and polypropylene were spun into fibers from the melt using a centrifugal spinning technique. Mono-component fibers and 50/50 blends of each polymer and a 33/33/33 blend of all three polymers were evaluated. Fiber morphology, chemistry, thermal, and mechanical properties were probed. Fiber diameters ranged from ca. 1 to over 12 µm, with polypropylene fibers having the smallest fiber diameters. Mono-component fibers were generally defect-free, while composite fibers containing polypropylene were beady. Fibers made from polyethylene terephthalate had the highest tensile strength, and the addition of polyethylene terephthalate to the other polymers improved the mechanical properties of the blends. Nano- and micro-fibers from both pure and mixed waste streams are expected to have applications in myriad areas such as ultra/micro-filtration, composites, and insulation.
منابع مشابه
Effect of Melt Spinning Variables on the Structural Changes of Recycled and Bottle Grade Filament Yarn PET
متن کامل
Large-scale and highly efficient synthesis of micro- and nano-fibers with controlled fiber morphology by centrifugal jet spinning for tissue regeneration.
PLLA fibrous tissue scaffolds with controlled fiber nanoscale surface roughness are fabricated with a novel centrifugal jet spinning process. The centrifugal jet spinning technique is a highly efficient synthesis method for micron- to nano-sized fibers with a production rate up to 0.5 g min(-1). During the centrifugal jet spinning process, a polymer solution jet is stretched by the centrifugal ...
متن کاملA Method of Forming Composite Structures Using In Situ-Formed Liquid Crystal Polymer Fibers in a Thermoplastic Matrix
A new high speed and potentially economical method of creating a composite material and structures therefrom is tested. The method consists of spinning composite fibers from a melt blend of a thermoplastic with a liquid crystal polymer (LCP). Discontinuous fibrils of the LCP are formed in situ during the spinning process. These composite fibers are aligned and placed in a mold and heated to mel...
متن کاملRice straw fiber-reinforced high-density polyethylene composite: Effect of fiber type and loading
Composite panels using virgin and recycled high-density polyethylene (VHDPE and RHDPE) and five types of natural fibers including four rice straw components (i.e., rice husk, rice straw leaf, rice straw stem, and whole rice straw) and wood fiber as control were made by melt compounding and compression molding. Fiber characteristics and the influences of fiber type and loading rate on HDPE cryst...
متن کاملFabrication of Biodegradable PCL Particles as well as PA66 Nanofibers via Air-Sealed Centrifuge Electrospinning (ASCES)
This study presents a method for fabrication of ultrafine polymeric nanofibers as well as nano/micro particles utilizing centrifugal and electrostatic forces simultaneously. To reduce the diameter and variety of nanofibers produced from solid state polymerized PA66, a unique electrocentrifuge spinning device was utilized with a rotating nozzle and collector, while the fabrication process (spinn...
متن کامل