Effect of Hot Rolling and Intermittent Annealing on the Texture Evolution of Monotectoid Bcc Zr-nb
ثبت نشده
چکیده
منابع مشابه
The Effect of Cold Rolling Process on the Microstructure and Texture Evolution in a 1 wt. % Si Non-oriented Electrical Steel
In this study, the effect of cold rolling process on the microstructure and texture evolution in 1wt. % Si non-oriented electrical steel was investigated. For this purpose, all samples were processed through single-stage hot rolling at 1100 ° C and two-stage cold rolling (cross rolling and unidirectional rolling) with intermediate annealing at 650 °C for 35 seconds. Finally, all of them were fu...
متن کاملEffect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels
Electrical steels are important alloys widely used in electrical instruments. The magnetic properties and low core loss of grain oriented silicon steels are closely related to the sharpness of Goss texture ({110} ).The direction of is the softest direction for magnetism. In this work, the microstructure and dependence of orientation density along the major texture fibers on the applied cold ro...
متن کاملEffects of Homogenization Conditions and Hot Rolling Parameters on Grain Refinement of an As-Cast 301 Stainless Steel
In this work, effects of homogenization time of 3 to 13 h at 1200 °C on the grain refinement of as-cast AISI 301 stainless steel after different hot rolling conditions were investigated. The results showed that the minimum grain size of 16±7 mm was achieved when homogenization took place at 1200 °C for 9 h followed by hot rolling at temperature range of 1000–1200 °C with strain of 0.8 and stra...
متن کاملEffect of Cold Rolling sequence on the Texture Development and Magnetic Loss of Grain Oriented Electrical Steels
Electrical steels are important alloys widely used in electrical instruments. The magnetic properties and low core loss of grain oriented silicon steels are closely related to the sharpness of Goss texture ({110} ).The direction of is the softest direction for magnetism. In this work, the microstructure and dependence of orientation density along the major texture fibers on the applied cold ro...
متن کاملEFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کامل