Bond strength to primary tooth dentin following disinfection with a chlorhexidine solution: an in vitro study.
نویسندگان
چکیده
PURPOSE The aim of this study was to determine the effect on shear bond strength of chlorhexidine used as a cavity disinfectant on primary tooth dentin. METHODS Thirty specimens were randomly divided into 3 groups (N = 10) and treated as follows: (1) in Group I, the dentin was acid etched with a 37% phosphoric acid for 15 seconds, washed and dried; (2) in Group II, a 2% commercial chlorhexidine solution (Cav Clean) was applied for 40 seconds, washed and dried following acid etching for 15 seconds; and (3) in Group III, dentin was treated with a 37% phosphoric acid gel containing 2% digluconate of chlorhexidine (Cond AC) for 15 seconds. In all specimens, the adhesive Single Bond (3M) was applied, and composite cylinders (Filtek Z 250) were built. The specimens were sheared with a universal testing machine (Instron) running at a crosshead speed of 0.5 mm/min, and the results calculated in MPa. The specimens were also observed to record the failure mode. RESULTS ANOVA analysis revealed that the shear bond strength of Group II (17.99+1.15 MPa) was significantly lower than Group I (19.88+1.02 MPa) and Group III (19.57+1.02 MPa). After debonding, 63% of the specimens presented cohesive failure of the material, 24% adhesive failure and 10% cohesive failure of dentin. CONCLUSIONS The commercial cavity disinfectant containing 2% chlorhexidine had an adverse effect on Single Bond and produced significantly lower shear bond strength than the etch gel with chlorhexidine and the acid etch alone.
منابع مشابه
Effect of Dentin Disinfection with 2% Chlorhexidine Gluconate and 0.3% Iodine on Dentin Bond Strength: An in vitro Study
Objective Cavity preparation is a surgical procedure that attempts to remove all infected dentin.1 Bacteria left beneath the filling material is greatest threat to the pulp. To reduce the potential for residual caries development and sensitivity, an antibacterial solution with the ability to disinfect the prepared tooth surface would be of help.2 So this study was conducted to evaluate and comp...
متن کاملEffect of various dentin disinfection protocols on the bond strength of resin modified glass ionomer restorative material
BACKGROUND Disinfection of dentin surface prior to any restorative therapy is important for the longevity of the treatment rendered. However, these dentin disinfection methods should itself not interfere with the adhesion of the restorative material. Therefore the aim of this study was to determine the effect of various dentin disinfection protocols on the shear bond strength (SBS) of resin mod...
متن کاملMicroshear Bond Strength of Glass Ionomer to Primary Dentin following Surface Treatment by Bur and Er,Cr:YSGG Laser
Background and Aim: Er,Cr:YSGG laser irradiation has been suggested as an effective method of cavity preparation and surface treatment to enhance the bond strength. The aim of this study was to assess the microshear bond strength of Fuji II LC glass ionomer (GI) cement to primary dentin following bur preparation and Er,Cr:YSGG irradiation. Materials and Methods: This in vitro, experimental stu...
متن کاملEffect of triple Antibiotic paste and 2% chlorhexidine gel on shear bond strength of composite resin to dentin; an in vitro study
متن کامل
Effect of Chlorhexidine on Micro-Shear Bond Strength of Two Adhesive Systems After Aging
Background and Aim: Recurrent caries and low bond strength are the main causes of composite restorations failure. This study sought to assess the effect of chlorhexidine (CHX) on micro-shear bond strength (MSBS) to dentin of a fourth generation adhesive system and a universal bonding agent after aging. Materials and Methods: This in vitro study used 32 extracted third molars and 3-5mm thick de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Pediatric dentistry
دوره 25 1 شماره
صفحات -
تاریخ انتشار 2003