Interpretation of a dilatometric anomaly previous to the ferrite-to-austenite transformation in a low carbon steel
نویسنده
چکیده
During continuous heating of a cold rolled low carbon (LC) steel a dilatometric anomaly has been detected previous to the well known ferrite-to-austenite transformation. This anomaly is due to the texture change and/or the dislocation annihilation that accompany the recrystallization process.
منابع مشابه
Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr
Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...
متن کاملMODELLING OF KINETICS OF AUSTENITE-TO-ALLOTRIOMORPHIC FERRITE TRANSFORMATION IN 0.37C–1.45Mn–0.11V MICROALLOYED STEEL
The present paper is concerned to the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austenite-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, wh...
متن کاملDilatometric and Hardness Analysis of C45 Steel Tempering with Different Heating-up Rates
Modelling of technological processes of heat treatment or welding, involving multiple heat source transitions, requires considering the phenomenon of tempering. In work have been presented results of dilatometric research of hardened C45 steel subjected to tempering. The analysis of the infl uence of heating rate at the kinetic determined from dilatometric curves has been made. There have also ...
متن کاملInvestigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel
This study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a TRIP steel with a high content of Al and a low content of Si. To the aim, appropriate treatments were used to produce the starting material (TRIP steel). The microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...
متن کاملSTRAIN INDUCED AUSTENITE-TO-FERRITE TRANSFORMATION BEHAVIOR OF PLAIN CARBON STEELS THROUGH SINGLE PASS ROLLING
In principal, a proper combination of strength and ductility is achieved through micro component refinement in steels. This is particularly empowered with ferrite refinement down to micron sizes in ferrite pearlite engineering steels. The latter is achieved through various well-defined methods in which strain induced transformation (SIT) has shown spectacular capabilities. In the present study,...
متن کامل