Ultrasonic Diagnosis in Multiphase Flows
نویسندگان
چکیده
We present here a new ultrasonic diagnosis technique in natural, porous rocks. This method, based on the ultrasonic velocity changes, allows us to measure the transient spacial distribution of two liquids (water and oil) in a sandstone.
منابع مشابه
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers
A preconditioned five-equation two-phase model coupled with an interface sharpening technique is introduced for simulation of a wide range of multiphase flows with both high and low Mach regimes. Harten-Lax-van Leer-Contact (HLLC) Riemann solver is implemented for solving the discretized equations while tangent of hyperbola for interface capturing (THINC) interface sharpening method is applied ...
متن کاملAn Estimation of Multiphase Relative Permeabilities in Reservoir Cores from Micro-CT Data
With significant increase of tomographic equipment power, demand for Prediction relative permeability prediction Predicting in porous media from digital image data. In this work, it is predicted three -phase relative permeabilities with co-applying Darcy’s and Stokes equations in two case studies, namely Bentheimer sandstone and Estaillades limestone which their micro-CT data files were downloa...
متن کاملNumerical Modeling of Multiphase Flow in Porous Media
The simultaneous flow of immiscible fluids in porous media occurs in a wide variety of applications. The equations governing these flows are inherently nonlinear, and the geometries and material properties characterizing many problems in petroleum and groundwater engineering can be quite irregular. As a result, numerical simulation often offers the only viable approach to the mathematical model...
متن کاملMultiple - Relaxation - Time Lattice Boltzmann Method for Multiphase Flows with High Density and Viscosity Ratios - 10135
In this paper, the lattice Boltzmann method is reviewed for specific applications to numerical simulation of multiphase flow problems. A thorough literature review regarding the multi-phase lattice Boltzmann method was conducted with special focus on flows with large density and viscosity ratios between the two phases. A multiphase model with the capability of handling large-density-ratios is c...
متن کاملThe Indication of Two-Phase Flow Pattern and Slug Characteristics in a Pipeline Using CFD Method
Multiphase flows are commonly encountered in oil and gas industries. The transport of multiphase flow causes the formation of slug, the increase of pressure drop and the possibility of phase changes therefore, a set of simulation runs was performed to predict flow regimes in a horizontal pipeline, and the results were compared with the Baker chart. The effects of small downward inclinations of ...
متن کامل