Fundamental Study on NDT of Building Wall Structure by Radar
نویسندگان
چکیده
GB-SAR (Ground Based Synthetic Aperture Radar) for inspection of wooden and concrete walls and structures has been developed and the system was evaluated by test measurements. The GB-SAR system uses frequency bandwidth 1-10GHz, and it can acquire full polarimetric radar signal. Then Synthetic Aperture (SAR) Radar signal processing is used to reconstruct 3-dimenatioal images of inner structure of the targets. We found that the radar polarimetry gives us very precise information of the damaged structures, and demonstrated that radar polarimetry is a useful tool for detecting fractures inside a concrete structures, and detection of small deformation of wooden structures.
منابع مشابه
Effect of Dry Wall Coating on Energy Consumption in Buildings Humid and Temperate Climate
Nowadays, ignoring the climatic features of the region and imitating other parts of the country, the choice of form and interviewing besides transforming the faces of buildings and towns and avoiding the indigenous identity of the area has made residents comfortable. The use of cement blocks and the application of roofs by metal sheets and the application of waterproofing and metal sheets in th...
متن کاملA Mathematical Formulation to Estimate the Fundamental Period of High-Rise Buildings Including Flexural-Shear Behavior and Structural Interaction
The objective of the current study is to develop a simple formula to estimate the fundamental vibration period of tall buildings for using in equivalent lateral force analysis specified in building codes. The method based on Sturm-Liouville differential equation is presented here for estimating the fundamental period of natural vibration. The resulting equation, based on the continuum represent...
متن کاملSpatial Analysis and Monitoring of Slope Stability using Persistent Scatterer Tecnique of Sentinel 1 Radar Images, Case Study: Sarcheshmeh Copper Mine
Based on the correlation diagram between the master and slave images (Fig. 5), the pair of appropriate images in terms of the shortest spatial and temporal lines is identified to produce the interferogram. As shown in Fig. 5, the maximum vertical baseline is obtained between -400 and -400. The obtained interferograms indicate the cumulative phase of the study area, which fluctuates between zero...
متن کاملParametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations
Nowadays, the increase of fossil fuel consumption intensifies the crucial role of architects. As buildings consume over one-third of the used energy, the society of architects is held responsible for this consumption. Therefore, the amount of energy used by a building is directly related to its design; meaning that reduction of energy consumption should be targeted at the design stage. In this ...
متن کاملComparative study between dynamic transient and degree-hours methods to estimate heating and cooling loads of building’s wall
In this paper, dynamic transient method and conventional degree-hours method (static) have been compared to estimate heating and cooling loads of building’s wall. All main wall surfaces of various orientations, i.e.South, West, East, North, and horizontal are considered in the climate of Tehran, Iran. In this study, a conventional wall structure, which is comprisedconcrete as main wall material...
متن کامل