Molten Carbonate Fuel Cells

نویسنده

  • Kouichi Takizawa
چکیده

Molten carbonate fuel cells use carbonate salts of alkali metals as electrolyte. Due to the highly corrosive nature of the electrolyte, various countermeasures are being developed. MCFCs are expected for high-efficiency power generation systems using hydrocarbon fuels, such as natural gas and coal gas. This article describes the mechanisms of operation and cell degradation, as well as the features of MCFC systems.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell

In this study, a more accurate model of fuel cell of molten carbonate was also used that was determined input and output control variables and investigated the behavior of the system with respect to those variables. A more complete kinetic is also implemented for increasing the effectiveness of the presented paper. The input variables include fuel flow rate of cell which is methane and cell vol...

متن کامل

Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle

Exergy analysis of an integrated molten carbonate fuel cell-turbo expander-steam turbine hybrid cycle has been presented in this study. The proposed cycle has been used as a sustainable energy approach to provide a micro hybrid power plant with high exergy efficiency. To generate electricity by the mentioned system, an externally reformed molten carbonate fuel cell located upstream of the combi...

متن کامل

High-temperature Fuel Cells

The molten carbonate fuel cell operates at approximately 650 °C (1200 °F). The high operating temperature is needed to achieve sufficient conductivity of the carbonate electrolyte, yet allow the use of low-cost metal cell components. A benefit associated with this high temperature is that noble metal catalysts are not required for the cell electrochemical oxidation and reduction processes. Molt...

متن کامل

Performance of La0.8Sr0.2CoO3 coated NiO as cathodes for molten carbonate fuel cells

La0.8Sr0.2CoO3 was coated on NiO (LSC–NiO) cathodes using a sol–gel method. Dissolution studies in molten Li2CO3 and K2CO3 (62:38 mol%) at 650 8C showed lower Ni dissolution than that of the conventional nickel oxide cathode. Impedance analysis showed that the behavior of the developed cathode is similar to that of nickel oxide. The LSC coated Ni cathode has an over potential of 109 mVat an app...

متن کامل

Modeling and Process Analysis of a Biomass Gasifier-Molten Carbonate Fuel Cell-Gas Turbine-Steam Turbine Cycle as a Green Hybrid Power Generator

Fuel cell-based hybrid cycles that include conventional power generators have been created to modify energy performance and output power. In the present paper, integrated biomass gasification (IBG)-molten carbonate fuel cell (MCFC)-gas turbine (GT) and steam turbine (ST) combined power cycle is introduced as an innovative technique in terms of sustainable energy. In addition, biomass gasificati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011