Machining Characteristics of Direct Laser Deposited Tungsten Carbide
نویسندگان
چکیده
منابع مشابه
Wear Characterization of Cemented Carbides (WC–CoNi) Processed by Laser Surface Texturing under Abrasive Machining Conditions
Cemented carbides are outstanding engineering materials widely used in quite demanding material removal applications. In this study, laser surface texturing is implemented for enhancing, at the surface level, the intrinsic bulk-like tribological performance of these materials. In this regard, hexagonal pyramids patterned on the cutting surface of a tungsten cemented carbide grade (WC–CoNi) have...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملMetal Embedded Optical Fiber Sensors: Laser-Based Layered Manufacturing Procedures
This paper describes laser-based layered manufacturing processes for embedding optical fiber Bragg gratings (FBGs) in metal structures to develop cutting tools with embedded sensors. FBG is a type of optical fiber that is used for the measurement of parameters manifesting as the changes of strain or temperature. The unique features of FBGs have encouraged their widespread use in structural meas...
متن کاملCryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard
igh-temperature corrosion/oxidation has been shown to be a major contributor to the wear of tungsten carbide when machining medium density fiberboard (MDF) (Stewart 1992). Consequently, a change in the properties of the tool material to resist wear from the adverse wood machining environment needs to be investigated. A deep cryogenic treatment shows promise as a tool material treatment for incr...
متن کاملEffect of Boron-Doped Diamond Interlayer on Cutting Performance of Diamond Coated Micro Drills for Graphite Machining
Thin boron doped diamond (BDD) film is deposited from trimethyl borate/acetone/hydrogen mixture on Co-cemented tungsten carbide (WC-Co) micro drills by using the hot filament chemical vapor deposition (HFCVD) technique. The boron peak on Raman spectrum confirms the boron incorporation in diamond film. This film is used as an interlayer for subsequent CVD of micro-crystalline diamond (MCD) film....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017