The Impact of Layer Number on Stray Inductance of DC-link Busbar in Power Converters
نویسندگان
چکیده
In high power converter design, low-inductance busbar connecting DC capacitors and power devices is the main concern to improve the quality of the whole power electronics system. This paper analyzes the impact of layernumber on the stray inductance of busbar taking a subway traction converter as example. The method of partial element equivalent circuit and the Q3D software are used to extract the stray inductance. The simulation and experimental results show that the stray inductance of three-layer busbar is lower than two-layer busbar with other same conditions.
منابع مشابه
The Impact of DC-power Layout on Stray Inductance of Bridge Arm in Power Converters
In high power converter design, low-inductance busbar connecting DC capacitors and power devices is the main concern to improve the quality of the whole power electronics system. There are several facts which affect the stray inductance of bridge arm. This paper mainly analyzes the influence of DC-power layout on the stray inductance taking a subway traction converter as example. The Psim9.0 so...
متن کاملتحلیل دینامیک مبدل سمت شبکه و طراحی کنترلکنندۀ خازن لینک DC در توربین-ژنراتورهای بادی با ژنراتور القایی دوسو تغذیه (DFIG)
This paper deals with the analysis of the grid side converter (GSC) dynamics and dc-link controller design in doubly fed induction generator (DFIG) based wind turbines. In this way, at first the current controller design for the GSC is proposed, and then power flow direction in rotor-side and grid-side converters at different slips is determined. Next, the dc link dynamics is extracted based on...
متن کاملA Repetitive Control- based Approach for Power Sharing among Boost Converters in DC Microgrids
In this paper a repetitive control (RC) approach to improve current sharing between parallel-connected boost converters in DC microgrids is presented. The impact of changes in line impedance on current sharing is investigated. A repetitive controller is designed and connected in series with current controller of the boost converters to control the switching signals such that by regulating of th...
متن کاملA Markovian Approach Applied to Reliability Modeling of Bidirectional DC-DC Converters Used in PHEVs and Smart Grids
In this paper, a stochastic approach is proposed for reliability assessment of bidirectional DC-DC converters, including the fault-tolerant ones. This type of converters can be used in a smart DC grid, feeding DC loads such as home appliances and plug-in hybrid electric vehicles (PHEVs). The reliability of bidirectional DC-DC converters is of such an importance, due to the key role of the expec...
متن کاملEfficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-based wind turbine during the grid faults
This paper presents a new nonlinear backstepping controller for a direct-driven permanent magnet synchronous generator-based wind turbine, which is connected to the power system via back-to-back converters. The proposed controller deals with maximum power point tracking (MPPT) in normal condition and enhances the low-voltage ride-through (LVRT) capability in fault conditions. In this method, to...
متن کامل