Geometry Processing and Statistical Shape Analysis of 3-D Anthropometry Data
نویسندگان
چکیده
3-D anthropometry data obtained from 3-D scanning technology provide detailed information about the human shape. However, due to the limitations of the sensors, such as field of view, lighting condition, and object self-occlusion, the raw 3-D data are usually noisy and incomplete. Much processing is necessary before they can be used for statistical analysis. In this paper, we present geometry processing tools for preparing the raw data for shape analysis. We show that these tools help extract useful information about the human shape.
منابع مشابه
From 3-D Scans to Design Tools
Many products are designed for human use and need to fit the human body shape. However, current CAD tools are focused on the object to be designed and have little capability of accessing human shape information. 3-D anthropometry – an emerging field – leverages the recent advances in 3-D imaging technology, providing new opportunities for designers to access accurate, complete, and detailed hum...
متن کاملData processing and analysis for the 2012 Canadian Forces 3D anthropometric survey
The 2012 Canadian Forces Anthropometric Survey (CFAS 2012) is the first major 3D anthropometric survey of Canadian Forces personnel. 2200 full-body scans were conducted, together with traditional anthropometric measurements. This survey aims at providing accurate, detailed, and up-to-date body shape information for equipment design and procurement. In this paper, we describe the data processing...
متن کاملارزیابی کارایی روش فوتوآنتروپومتری دو بعدی در اندازهگیری ابعاد آنتروپومتری دست
Introduction: Various studies carried out on different photo anthropometry, but each one had some deficiencies which during the years they have been resolved. In the current study in order to determine the anthropometric dimensions of the hand, two-dimensional images were used. And its results were compared with manual methods (caliper). The objective of this paper is to test the efficiency of ...
متن کاملAlignment Influence on 3D Anthropometric Data Clustering
Shape analysis and comparison is important to sizing system for the design of many products which require close fitting contact with the human body. However, the choice of the alignment reference can profoundly influence the shape analytical results. The objective of this case study is to demonstrate that the statistical results of the threedimensional (3D) upper heads could be different if dif...
متن کاملUnified Method to Block Pornographic Images in Websites
This paper proposes a technique to block adult images displayed in websites. The filter is designed so as to perform even in exceptional cases such as, where face detection is not possible or improper face visibility. This is achieved by using an alternative phase to extract the MFC (Most Frequent Color) from the Human Body regions estimated using a biometric of anthropometric distances between...
متن کامل