Closed Loop Control Methods
نویسندگان
چکیده
In this paper, a systematic overview of PLL-based closed-loop control methods for interleaved DCM/CCM boundary boost PFC converters is presented. It is shown that the PLL-based closed-loop methods always provide stable operation, unlike the open-loop control methods, where the only method which results in stable operation is the slave synchronization to the turn-on instant of the master with current-mode control. It is also shown that the dynamic response of the PLL-based closedloop methods with master-slave approach and democratic approach is almost identical. Experimental results obtained on a 300-W, universal input, 400-V output, interleaved DCM/CCM boundary boost PFC prototype circuit with a dedicated controller IC utilizing a democratic, PLL-based closed-loop method is also provided.
منابع مشابه
Dynamic Load Carrying Capacity of Mobile-Base Flexible-Link Manipulators: Feedback Linearization Control Approach
This paper focuses on the effects of closed- control on the calculation of the dynamic load carrying capacity (DLCC) for mobile-base flexible-link manipulators. In previously proposed methods in the literature of DLCC calculation in flexible robots, an open-loop control scheme is assumed, whereas in reality, robot control is achieved via closed loop approaches which could render the calculated ...
متن کاملClosed- and Open-loop Deep Brain Stimulation: Methods, Challenges, Current and Future Aspects
Deep brain stimulation (DBS) is known as the most effective technique in the treatment of neurodegenerative diseases, especially Parkinson disease (PD) and epilepsy. Relative healing and effective control of disease symptoms are the most significant reasons for the tangible tendency in use and development of this technology. Nevertheless, more cellular and molecular investigations are required ...
متن کاملControl of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملA Closed Loop Control of Quadratic Boost Converter Using PID Controller
This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller. Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...
متن کاملJoint Closed-Loop Power Control and Base Station Assignment for DS-CDMA Receiver in Multipath Fading Channel with Adaptive Beamforming Method
In this paper, we propose smart step closed-loop power control (SSPC) algorithm and base station assignment based on minimizing the transmitter power (BSAMTP) technique in a direct sequence-code division multiple access (DS-CDMA) receiver in the presence of frequency-selective Rayleigh fading. This receiver consists of three stages. In the first stage, with conjugate gradient (CG) adaptive ...
متن کامل