Mass-Spring Based Point-Sampled Surface Modelling
نویسندگان
چکیده
In this paper, a physically based modelling method for point-sampled surface is proposed based on mass-spring system. First, a Delaunay based simplification algorithm is applied to the original point-sampled surface to produce the simplified point-sampled surface. Then the mass-spring system for the simplified pointsampled surface is constructed by using tangent planes to address the lack of connectivity information. Finally, the deformed point-sampled surface is obtained by transferring the deformation of the simplified pointsampled surface. Experiments on both open and closed point-sampled surfaces illustrate the validity of the proposed method.
منابع مشابه
Mass-spring systems on the GPU
We present and analyze different implementations of mass-spring systems for interactive simulation of deformable surfaces on graphics processing units (GPUs). For the amount of springs we target, numerical time integration of spring displacements needs to be accelerated and the transfer of displaced point positions for rendering must be avoided. To fulfill these requirements, we exploit feature...
متن کاملApplication of molecular modeling with mass-spring systems for computer simulation and animation
This paper demonstrates the use of potential functions of molecular modeling in mass-spring systems. In mass-spring systems, force acting on each mass point is determined by the spring length between linked mass-points. In molecular modeling, forces are calculated using bond length (spring length), bond angle and stretch-bond interactions. Molecular modeling therefore provides more accurate for...
متن کاملSpring-mass model application to engineering NURBS surface reconstruction
In this paper an original application of spring-mass based model to NURBS surface reconstruction from point clouds is described. In last few years spring-mass models have been largely and successfully applied in Computer Animation for cloth simulation, but their application has been limited to non-Engineering fields. Following the physical metaphor of laying a cloth over a non-structured set of...
متن کاملB-SPLINE METHOD FOR TWO-POINT BOUNDARY VALUE PROBLEMS
In this work the collocation method based on quartic B-spline is developed and applied to two-point boundary value problem in ordinary diferential equations. The error analysis and convergence of presented method is discussed. The method illustrated by two test examples which verify that the presented method is applicable and considerable accurate.
متن کاملMechanical System Modelling of Robot Dynamics Using a Mass/Pulley Model
The well-known electro-mechanical analogy that equates current, voltage, resistance, inductance and capacitance to force, velocity, damping, spring constant and mass has a shortcoming in that mass can only be used to simulate a capacitor which has one terminal connected to ground. A new model that was previously proposed by the authors that combines a mass with a pulley (MP) is shown to simulat...
متن کامل