Two Benchmarks for Qualification of Pressure Vessel Fluence Calculational Methodology

Two benchmarks for the qualification of the pressure vessel fluence calculational methodology were formulated and are brieily described. The Pool Critical Assembly (PCA) benchmark is based on the experiments performed at the PCA in Oak Ridge. The measured quantities to be compared against the calculated values are the equivalent fission fluxes at several locations in front, behind, and inside the pressure-vessel wall simulator. This benchmark is particularly suitable to test the capabilities of the calculational methodology and cross-section libraries to predict in-vessel gradients because only a few approximations are necessary in the analysis. The HBR-2 benchmark is based on the data for the H. B. Robinson-2 plant, whch is a 2300 MW (thermal) pressurized light-water reactor. The benchmark provides the reactor geometry, the material compositions, the core power distributions, and the power history data. The quantities to be calculated are the specific activities of the radiometric monitors that were irradiated in the surveillance capsule and in the cavity location during one fuel cycle. The HBR-2 benchmark requires modelling approximations, power-to-neutron source conversion, -and treatment of time dependant variations. It can therefore be used to test the overall performance and adequacy of the calculational methodology for power-reactor pressure-vessel flux calculations. Both benchmarks were analyzed with the DORT code and the BUGLE-96 cross-section library that is based on ENDFB-VI evaluations. The calculations agreed with the measurements within -lo%, and the calculations underpredicted the measurements in all the cases. This indicates that the ENDFB-VI cross sections resolve most of the discrepancies between the measurements and calculations. The decrease of the C/M ratios with increased thickness of iron, which was typical for pre-ENDFB-VI libraries, is almost completely removed.