Effect of Process Parameters on Natural Aging in a 1004 Steel
نویسندگان
چکیده
L. Guerra-Fuentes, A. Juarez-Hernandez, M.A.L. Hernandez-Rodriguez, University Autonumous of Nuevo León, M. Herrera-Trejo, CINVESTAV Ramos Arizpe Coah., Mexico The eff ects of natural aging on the tensile strength, Rm, in a rod of 1004 steel were studied. Natural aging was performed at 298 K over a period of 126 h and values were recorded at diff erent intervals. Electron microscopy observations showed just dissolution of perlite phase for the base metal and heat aff ected zone. The largest Rm value was obtained after 123 h, due to maximum aging, nitrogen and boron contents were found to be the most important elements in this research. The results indicate that, low velocity and high nitrogen concentration reduce, Rm, as heat treatment time and nitrogen increase solubility of nitrogen increases.
منابع مشابه
Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...
متن کاملInvestigating the Effect of Optimum Welding Parameters on the Microstructural and Mechanical Properties of St37 Steel and 316L Stainless Steel Welded by the Friction Stir Welding Process
In this research, St37 and 316L steel sheets were welded using friction stir welding (FSW) process and effective parameters such as the rotational speed, linear speed of the tool, pin diameter, and their appropriate values were studied. The microstructure, hardness, and strength of the different welding regions were investigated. It was observed that in the stir zone (SZ), a mechanical operatio...
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملExperimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel
Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...
متن کاملThe Study of Deep Drawing of Brass-steel Laminated Sheet Composite Using Taguchi Method
Deep drawing process is one of the most applicable methods in producing industrial parts. In this process, the initial blank deforms to final product using a rigid punch and die. In this investigation, the effect of deep drawing process parameters of brass/steel laminated sheet composites on required forming force has been investigated. The process simulated using finite element method (FEM) an...
متن کامل