Laboratory studies in comminution: Part VI The specific rate of breakage for rod and ball milling of quartz
نویسندگان
چکیده
The influence of feed size and pulp density on the specific rate of breakage of quartz was investigated. Plots of log fraction of feed remaining within the feed size interval against grinding time allowed the application of the first order grinding model to be examined. Substantial non-linearities were observed for all feed sizes due to environmental and material factors. For feed sizes above 1.3 mm, the specific rate of quartz breakage was higher with rod milling than ball milling, but below this size the reverse was true. Material that remained in the feed size interval after the initial grinding broke more slowly in subsequent grinding than the original feed material. Grinding media and time as well as feed size influenced the effects of pulp density on grinding. More dilute pulps (eg 50 per cent solids density by weight) were favoured for higher rates of breakage in rod milling but for ball milling, the optimum pulp density appeared to be 60 to 70 per cent solids by weight.
منابع مشابه
A STUDY ON THE SPECIFIC RATE OF BREAKAGE OF IRON ORE OF SANGAN MINE IN A LABORATORY BALL MILL
Abstract: The specific rate of breakage is one of the most important factors in evaluation of grinding process especially in ball mill. In this article the effect of ball size and feed size on selection function were investigated using batch grinding circuit on two-iron ore anomaly (B, C) from sangan mine in north of Iran. Eight different monosize fractions were prepared between 2000 and 50...
متن کاملاثر فاصله تیغه از همزن و دبی خروجی بر کیفیت برنج در سفیدکن تیغه‌ای رایج بهینه شده
Studies show that excessive rotation of rice, when the grains revolve inside the milling chamber, increase the breakage. Ease of grain movement in the milling chamber could minimize this problem by utilizing screw conveyor at the first part of rotor. In this study the rotor of a conventional milling was equipped with a screw conveyor. The effects of two rotor types (modified and conventional ro...
متن کاملاثر فاصله تیغه از همزن و دبی خروجی بر کیفیت برنج در سفیدکن تیغه‌ای رایج بهینه شده
Studies show that excessive rotation of rice, when the grains revolve inside the milling chamber, increase the breakage. Ease of grain movement in the milling chamber could minimize this problem by utilizing screw conveyor at the first part of rotor. In this study the rotor of a conventional milling was equipped with a screw conveyor. The effects of two rotor types (modified and conventional ro...
متن کاملبررسی تغییرات فازی سیلیس و سیلیسیوم به هنگام آسیاب کاری
In the present study phase transformation of silicon and silica during milling in different atmospheres was investigated. The silicon powder was subjected to high energy ball milling in ammonia (25%) atmosphere. The milled powder was subsequently annealed at 1200 ◦C for 1 hour. In another test a mixture of AlN and amorphous silica (micro silica) was subjected to high energy ball milling. The m...
متن کاملDefects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling
Nano fillers are part of new studies to enhance various properties of fluids and solids. For example, adding nanoparticles as an enforcement in nanocomposites or as an additive to improve thermal or electrical properties in nano-fluids are of extreme importance in science and industry. There are numerous methods to uniformly disperse nanoparticles in fluid and solid phase. One of the well-used ...
متن کامل