Etch Trends in Electrochemical Machining with Ultrashort Voltage Pulses Predictions from Theory and Simulation
نویسندگان
چکیده
We present analytical and computational models used to investigate the dependence of etch resolution on pulse duration, tool radius, and etched feature aspect ratio in electrochemical machining with ultrashort voltage pulses. Our results predict that, for the high aspect ratio system in which the effect of trench top and bottom edges can be ignored, the increase of etch resolution with pulse length is a strong function of tool radius, while there is a significant dependence on etch depth for the low aspect ratio system in which the edge effects become important. A detailed analysis of the etch trends is presented. © 2005 The Electrochemical Society. DOI: 10.1149/1.2136250 All rights reserved.
منابع مشابه
The Mathematical Modeling and Computer Simulation of Pulse Electrochemical Micromachining
need for complex and accurate three dimensional (3-D) microcomponents is increasing rapidly for many industrial and consumer products. Electrochemical machining process (ECM) has the potential of generating desired crack-free and stress-free surfaces of microcomponents. This paper reports a study of pulse electrochemical micromachining (PECMM) using ultrashort (nanoseconds) pulses for generatin...
متن کاملModelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool
Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...
متن کاملControlling Electrochemical Machining By Using a Fuzzy Logic Approach
New trends and the effect of key factors influence the quality of the holes produced by ECM processes. Researchers developed a fuzzy logic controller by adding intelligence to the ECM process. Maintaining optimum ECM process conditions ensures higher machining efficiency and performance. This paper presents the development of a fuzzy logic controller to add intelligence to the ECM process. An e...
متن کاملControlling Electrochemical Machining By Using a Fuzzy Logic Approach
New trends and the effect of key factors influence the quality of the holes produced by ECM processes. Researchers developed a fuzzy logic controller by adding intelligence to the ECM process. Maintaining optimum ECM process conditions ensures higher machining efficiency and performance. This paper presents the development of a fuzzy logic controller to add intelligence to the ECM process. An e...
متن کاملInvestigating electrochemical drilling (ECD) using statistical and soft computing techniques
In the present study, five modeling approaches of RA, MLP, MNN, GFF, and CANFIS were applied so as to estimate the radial overcut values in electrochemical drilling process. For these models, four input variables, namely electrolyte concentration, voltage, initial machining gap, and tool feed rate, were selected. The developed models were evaluated in terms of their prediction capability with m...
متن کامل