Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum
نویسندگان
چکیده
Grain rotation is a well-known phenomenon during high (homologous) temperature deformation and recrystallization of polycrystalline materials. In recent years, grain rotation has also been proposed as a plasticity mechanism at low temperatures (for example, room temperature for metals), especially for nanocrystalline grains with diameter d less than ~15 nm. Here, in tensile-loaded Pt thin films under a high-resolution transmission electron microscope, we show that the plasticity mechanism transitions from cross-grain dislocation glide in larger grains (d>6 nm) to a mode of coordinated rotation of multiple grains for grains with d<6 nm. The mechanism underlying the grain rotation is dislocation climb at the grain boundary, rather than grain boundary sliding or diffusional creep. Our atomic-scale images demonstrate directly that the evolution of the misorientation angle between neighbouring grains can be quantitatively accounted for by the change of the Frank-Bilby dislocation content in the grain boundary.
منابع مشابه
Stress-assisted grain growth in nanocrystalline metals: Grain boundary mediated mechanisms and stabilization through alloying
The mechanisms of stress-assisted grain growth are explored using molecular dynamics simulations of nanoindentation in nanocrystalline Ni and Ni-1 at.% P as a function of grain size and deformation temperature. Grain coalescence is primarily confined to the high stress region beneath the simulated indentation zone in nanocrystalline Ni with a grain size of 3 nm. Grain orientation and atomic dis...
متن کاملGrain boundary-mediated plasticity in nanocrystalline nickel.
The plastic behavior of crystalline materials is mainly controlled by the nucleation and motion of lattice dislocations. We report in situ dynamic transmission electron microscope observations of nanocrystalline nickel films with an average grain size of about 10 nanometers, which show that grain boundary-mediated processes have become a prominent deformation mode. Additionally, trapped lattice...
متن کاملNanocrystalline materials and coatings
In recent years, near-nano (submicron) and nanostructured materials have attracted increasingly more attention from the materials community. Nanocrystalline materials are characterized by a microstructural length or grain size of up to about 100 nm. Materials having grain size of 0.1 to 0.3 mm are classified as submicron materials. Nanocrystalline materials exhibit various shapes or forms, and ...
متن کاملSize-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars
Nanocrystalline metals generally exhibit high strengths and good fatigue resistance. Their strengthening scales with the inverse of grain size through square root dependence down to grain sizes of 20 nm, representing the well-known Hall–Petch relation. Here we show that in surface-dominated structures with sub-micron dimensions, i.e. nanopillars, 60 nm grained Ni–W alloys exhibit lower tensile ...
متن کاملGrain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion
The unique nonuniform deformation characteristic of high-pressure torsion was used to produce nanostructures with systematically varying grain sizes in a copper disk, which allows us to study the grain-size effect on the deformation mechanisms in nanostructured copper using a single sample. The as-processed copper disk has 100–200 nm grains near its center and 10–20 nm grains at its periphery. ...
متن کامل