Polymeric Flexible Immunosensor Based on Piezoresistive Micro-Cantilever with PEDOT/PSS Conductive Layer
نویسندگان
چکیده
In this paper, a fully polymeric micro-cantilever with the surface passivation layer of parylene-C and the strain resistor of poly(3,4-ethylenedioxythiophene)/poly (styrene sulfonate) (PEDOT/PSS) was proposed and demonstrated for immunoassays. By optimizing the design and fabrication of the polymeric micro-cantilever, a square resistance of 220 Ω/□ for PEDOT/PSS conductive layer have been obtained. The experimental spring constant and the deflection sensitivity were measured to be 0.017 N/m and 8.59 × 10-7 nm-1, respectively. The biological sensing performances of polymeric micro-cantilever were investigated by the immunoassay for human immunoglobulin G (IgG). The immunosensor was experimentally demonstrated to have a linear behavior for the detection of IgG within the concentrations of 10~100 ng/mL with a limit of detection (LOD) of 10 ng/mL. The experimental results indicate that the proposed polymeric flexible conductive layer-based sensors are capable of detecting trace biological substances.
منابع مشابه
PEDOT/PSS-Halloysite Nanotubes (HNTs) Hybrid Films: Insulating HNTs Enhance Conductivity of the PEDOT/PSS Films.
We have for the first time found that completely insulating Halloysite nanotubes (HNTs) significantly enhance electrical conductivity of PEDOT/PSS films by simply mixing. Based on this accident finding we have created highly porous and conductive PEDOT/PSS films hybridized with the HNTs. Through further optimization of the mixing condition we have obtained flexible and conductive hybrid films w...
متن کاملFreeze Drying Improves the Shelf-Life of Conductive Polymer Modified Neural Electrodes
Coating microelectrodes with conductive polymer is widely recognized to decrease impedance and improve performance of implantable neural devices during recording and stimulation. A concern for wide-spread use of this approach is shelf-life, i.e., the electrochemical stability of the coated microelectrodes prior to use. In this work, we investigated the possibility of using the freeze-drying pro...
متن کاملGrowth Mechanism of Strain-Dependent Morphological Change in PEDOT:PSS Films
UNLABELLED Understanding the mechanism of the strain-dependent conductivity change in polymers in stretched conditions is important. We observed a strain-induced growth of the conductive regions of PEDOT PSS films, induced by a coalescence of conductive PEDOT-rich cores. This growth due to coalescence leads to a gradual decrease in the electrical resistivity up to 95%, independent of the thic...
متن کاملA comprehensive study of sulfonated carbon materials as conductive composites for polymer solar cells.
Sulfonated carbon nanotubes (S-CNTs) and sulfonated graphene (S-Gra) with superior dispersibility were successfully prepared to modify poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) for applications in polymer solar cells (PSCs). The synergetic effect between S-CNTs/S-Gra and PEDOT:PSS could remove excess insulating PSS chains leading to an obvious phase separation between ...
متن کاملUsing Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges
In this study, polydimethylsiloxane (PDMS) and conductive carbon nanoparticles were combined to fabricate a conductive elastomer PDMS (CPDMS). A high sensitive and flexible CPDMS strain sensor is fabricated by using stamping-process based micro patterning. Compared with conventional sensors, flexible strain sensors are more suitable for medical applications but are usually fabricated by photoli...
متن کامل