A Novel Microstrip Dual-band Bandpass Filter Using Dual-mode Square Patch Resonators
نویسندگان
چکیده
Dual-mode square patch resonator is well known in the design of a single band quasi-elliptic bandpass filter response. Here, the dual-mode square patch resonator is employed to achieve a dualband bandpass filter. A 6 pole dual-band bandpass filter response with 3 poles at each passband will be presented. The dual-band filter also exhibits a transmission zero between the two passbands. A detailed discussion on the design procedure together with the simulation and experimental results will be presented.
منابع مشابه
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کاملA Microstrip Dual-Band Bandpass Filter with Reduced Size and Improved Stopband Characteristics
A novel compact microstrip dual-band bandpass filter(BPF) is developed with remarkably improved stopband characteristics. Two square open-loop resonators are embedded in a U-shaped resonator to achieve a significant size-reduction of the filter. Meanwhile, a cross-coupling between nonadjacent resonators is exploited to produce multiple transmission zeros in the stopbands of the filter. As a con...
متن کاملDual-Mode Bandpass Filters Using Microstrip Slotted Equilateral Triangular Patch Resonators
Two compact and low loss dual-mode filters are proposed by using degenerate modes of slotted triangular microstrip patch resonators. The geometrical size and radiation loss of the triangular patch are reduced simultaneously by loading both horizontal and vertical slots. The resonant frequencies of two degenerate modes can be easily controlled by varying the dimensions and positions of the slots...
متن کاملMicrostrip Dual-Band Bandpass Filter Using U-Shaped Resonators
Coupled resonators are widely used in the design of filters with dual-passband responses. In this paper, we present a dual-band bandpass filter using only couplings between adjacent resonators without cross-couplings. The dual-band bandpass filter with centre frequencies of 1747MHz and 1879MHz respectively is designed and fabricated using microstrip U-shaped resonators. Using the coupled resona...
متن کاملSynthesizing Microstrip Dual-Band Bandpass Filters Using Frequency Transformation and Circuit Conversion Technique
A novel method is proposed to synthesize dual-band bandpass filters (BPFs) from a prototype lowpass filter. By implementing successive frequency transformations and circuit conversions, a new filter topology is obtained which consists of only admittance inverters and series or shunt resonators, and is thereby easy to be realized by using conventional distributed elements. A microstrip dual-band...
متن کامل