Technical Report: JBIG Compression Algorithms for “Dummy Fill” VLSI Layout Data
نویسندگان
چکیده
3
منابع مشابه
Compression Algorithms for \Dummy Fill" VLSI Layout Data
Dummy fill is introduced into sparse regions of a VLSI layout to equalize the spatial density of the layout, improving uniformity of chemical-mechanical planarization (CMP). It is now well-known that dummy fill insertion for CMP uniformity changes the back-end flow with respect to layout, parasitic extraction and performance analysis. Of equal import is dummy fill’s impact on layout data volume...
متن کاملBinary Lossless Layout Compression Algorithms and Architectures for Direct-write Lithography Systems
Second Reader Date iii ABSTRACT Future lithography systems must produce more dense chips with smaller feature sizes, while maintaining throughput comparable to today's optical lithography systems. This places stringent data-handling requirements on the design of any maskless lithography system. Today's optical lithography systems transfer one layer of data from the mask to the entire wafer in a...
متن کاملThe Ibm Verification Suite Jbig-abic
The IBM JBIG-ABIC Verification Suite is a newly designed verification suite that contains more than 5000 correctly encoded test images. Previously existing verification images in total and consolidated in an ad hoc suite tested only a small fraction of the algorithm and were inadequate. The IBM JBIG-ABIC Verification Suite provides compatibility testing reference data for the ITU-T/ISO JBIG seq...
متن کاملAnalysis and Comparison of Compression Algorithm for Light Field Mask
This paper describes comparison and analysis of state-of-theart lossless image compression algorithms for light field mask data that are very useful in transmitting and refocusing the light field images. Recently, light field cameras have received wide attention in that they provide 3D information. Also, there has been a wide interest in studying the light field data compression due to a huge l...
متن کاملAdvanced low-complexity compression for maskless lithography data
A direct-write maskless lithography system using 25nm for 50nm feature sizes requires data rates of about 10 Tb/s to maintain a throughput of one wafer per minute per layer achieved by today’s optical lithography systems. In a previous paper, we presented an architecture that achieves this data rate contingent on 25 to 1 compression of lithography data, and on implementation of a real-time deco...
متن کامل