Combustion of Water-in-Oil Emulsion Layers Supported on Water
نویسندگان
چکیده
In situ combustion of a water-in-oil emulsion layer supported on water is a complex process. In this paper, the combustion process of water-in-oil emulsion layers floating on top of a water body, as in the case of in situ burning of oil spilled at sea that has turned into emulsion, is modeled by using comprehensive mathematical treatment, and the results are compared with data obtained in our lab. The burning process model is divided into three regimes, as follows:
منابع مشابه
Pickering Emulsion Polymerization of Styrene-co-butyl Acrylate Nanoparticles by Using Cloisite Na+ as Surfactant
Cloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform infrared (FTIR) spectrum approved the corporation of Cloisite Na+ layers within the polymer matrix. Effect of clay content was a...
متن کاملThe measurement of droplet size distribution of water-oil emulsion through NMR method
The effects of water/oil volume ratio, type and concentration of demulsifier, water salinity and mixing speed on the average water droplets size in water-oil emulsion are evaluated at different times through NMR measurements.The type and concentration of demulsifier have the greatest effects on the average droplet size with 38% and 31.5%, respectively. The water/oil volume ratio, water salinity...
متن کاملEffect of Dispersed Phase Volume Fraction on Physical Stability of Oil-in-Water Emulsion in The Presence of Gum Tragacanth
Background: The dispersed phase volume fraction plays key role in oil-in-water emulsion stability by different mechanisms like partial flocculation, depletion flocculation and bridging flocculation. Since the mentioned mechanism is affected by emulsifier concentration presented in system, the major aim of this study was to investigate the effect of dispersed phase volume fraction on physical st...
متن کاملInfluence of Casein and Inulin on the Properties of Fish Oil Nano-emulsion
The purpose of this study is to produce an oil-in-water nano-emulsion by ultrasonication. Casein combined with inulin used as continuous phase, while dispersed phase consisted of fish oil. The size of the nano-emulsion and the pH of nano-emulsion were characterized. Ultrasound has been used for preparing emulsion by 24 KHz intensity for 120 seconds. Prepared nano-emulsion was investigated by pa...
متن کاملInfluence of Casein and Inulin on the Properties of Fish Oil Nano-emulsion
The purpose of this study is to produce an oil-in-water nano-emulsion by ultrasonication. Casein combined with inulin used as continuous phase, while dispersed phase consisted of fish oil. The size of the nano-emulsion and the pH of nano-emulsion were characterized. Ultrasound has been used for preparing emulsion by 24 KHz intensity for 120 seconds. Prepared nano-emulsion was investigated by pa...
متن کامل