Research on the Piston with Damping Hole and Pressure Recess of Axial Piston Motor
نویسندگان
چکیده
Based on the principle of hydrostatic bearing, in this study, several novel kinds of pistons were designed out, and the mathematic model of hydrostatic bearing on piston was established and analyzed. It was also found that, the diameter of damping hole and the width of pressure recess had impact on the radial load capacity of piston, the overall efficiency of axial piston motor, and the friction and wear capacity of piston. Results from tests shown that in the case of the pressure difference of 10MPa to 22MPa and the different speed of 500rpm to 2000rpm, the overall efficiency of axial piston motor could be improved by 0.1%-0.6%, compared to the ordinary piston. On the other hand, the wear scar of the piston modified was circular, and the one of the ordinary piston was longitudinal and deep, which shown that the piston modified could improve the wear capacity.
منابع مشابه
An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine
This paper is devoted to study the effects of pressure drop in heat exchangers on the dynamics of a free piston Stirling engine. First, the dynamic equations governing the pistons as well as the gas pressure equations for hot and cold spaces of the engine are extracted. Then, by substituting the obtained pressure equations into the dynamic relationships the final nonlinear dynamic equations gov...
متن کاملExperimental study of piston scuffing effect on engine performance parameters
Piston scuffing is one of the destructive faults in internal combustion (IC) engines. There are different causes to make this fault that lack of lubricant is the most important one among them. The purpose of this paper is the quantitative study of the piston scuffing effects on the engine performance parameters which is a new research direction in the IC engine filed. For this reason, several e...
متن کاملEvaluating the coupled thermo-mechanical stresses for an aluminum alloy piston used in a gasoline engine XU7
In modern engines with higher compression ratios, severe pressures and non-uniform heating up is occurred for the engine parts. The piston as the most critical part among all automotive components has been the subject of numerous studies on calculation of temperature distribution, but thermal stress analyses are limited. In this study, the piston of gasoline engine XU7 which is widespread in Ir...
متن کاملNumerical And Experimental Analysis Of A Linear Compressor
The paper presents the study of a new compressor for household appliances, developed through a virtual simulation system, with Simulink and Adams software. Linear compressor has a linear motor coupled to a mechanical system: a piston and a spring. The advantage of this compressor respect to a standard reciprocating compressor is due to the high reduction of energy losses and variable capacity p...
متن کاملSimulation research on distribution method of axial piston pump utilizing pressure equalization mechanism
Noise reduction in axial piston pumps has been attempted by many researchers with different design approaches and techniques. However, most traditional structures on valve plate for noise reduction are at the cost of efficiency to different extent. In this article, a new distribution method with pressure equalization mechanism composed of check valve and pressure recuperation chamber is discuss...
متن کامل