Cascode Switching Modeling and Improvement in Flyback Converter for LED Lighting Applications
نویسندگان
چکیده
Abstract – Modeling of the cascode switching structure used in Flyback converter for achieving fast startup in the deeply dimmed phase-cut LED driver is presented in this paper. The cascode structure’s inherent instability and oscillation issue is modeled and analyzed quantitatively. Three solutions are proposed to stabilize the structure and suppress the unstable voltage oscillation. Solutions are studied using the proposed model for design robustness. And this model can be further applied to the popular new high voltage (for example 650V) cascode GaN FET technology. Experimental results of a 20W phase-cut dimmable LED driver are demonstrated to verify the proposed modeling method and solutions.
منابع مشابه
Design Guideline of Single-Stage Flyback AC-DC Converter Using FAN7530 for LED Lighting
This application note describes the single-stage power factor correction (PFC) and presents the design guidelines of a 75W universal-input, single-stage PFC for LED lighting applications. Flyback converter topology controlled by the critical conduction mode control IC, FAN7530 is applied and several functions; such as CV/CC mode feedback circuits, cycle-by-cycle current limit, soft-starting fun...
متن کاملA Highly Efficient SEPIC-Flyback Integrated Converter as an LED Driver
Light-emitting diodes (LEDs) have been widely used for various lighting applications. A high power factor single-stage single-switch driver can be used to supply LEDs without using an electrolytic capacitor. By integrating the single-ended primary inductor converter (SEPIC) and flyback converter, LED driver could achieve nearly a unity power factor and low total harmonic distortion (THD). Since...
متن کاملEfficiency Improvement of the Flyback Converter Based on High Frequency Transformer Winding Rearrangement
In this paper, a novel method for loss reduction and efficiency optimization of the high frequency flyback transformers is proposed based on rearrangement of the windings. According to detailed analysis of the high frequency flyback transformer using FEM technique, a novel and simple approach for its design improvement and loss reduction is introduced. It is shown that leakage flux scattering i...
متن کاملModeling and Analysis of Flyback Switching Power Converter using FPGA
This paper presents a modeling of Pulse Width Modulation (PWM) for conducted noise reduction in Switching Power Converters (SPC) using Field Programmable Gate Array (FPGA) based controller. Buck boost Flyback converter is the preferred choice among variety of switching power converters due to its low component count, cost-effective structure as well as its large dynamic range. Converters should...
متن کامل