Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices.
نویسندگان
چکیده
This paper describes the compatibility of poly(dimethylsiloxane) (PDMS) with organic solvents; this compatibility is important in considering the potential of PDMS-based microfluidic devices in a number of applications, including that of microreactors for organic reactions. We considered three aspects of compatibility: the swelling of PDMS in a solvent, the partitioning of solutes between a solvent and PDMS, and the dissolution of PDMS oligomers in a solvent. Of these three parameters that determine the compatibility of PDMS with a solvent, the swelling of PDMS had the greatest influence. Experimental measurements of swelling were correlated with the solubility parameter, delta (cal(1/2) cm(-3/2)), which is based on the cohesive energy densities, c (cal/cm(3)), of the materials. Solvents that swelled PDMS the least included water, nitromethane, dimethyl sulfoxide, ethylene glycol, perfluorotributylamine, perfluorodecalin, acetonitrile, and propylene carbonate; solvents that swelled PDMS the most were diisopropylamine, triethylamine, pentane, and xylenes. Highly swelling solvents were useful for extracting contaminants from bulk PDMS and for changing the surface properties of PDMS. The feasibility of performing organic reactions in PDMS was demonstrated by performing a Diels-Alder reaction in a microchannel.
منابع مشابه
Vapor deposition of cross-linked fluoropolymer barrier coatings onto pre-assembled microfluidic devices.
The interior surfaces of pre-assembled poly(dimethylsiloxane) (PDMS) microfluidic devices were modified with a cross-linked fluoropolymer barrier coating that significantly increased the chemical compatibility of the devices.
متن کاملMicrofluidic Protein Patterning on Silicon Nitride Using Solvent Extracted Poly(dimethylsiloxane) Channels.
Biomolecular patterning is essential for the creation of sensing motifs that rely on receptor-ligand binding for selectivity. Microfluidic devices have the potential to aid in the development of simple, robust methods for biomolecular patterning and therefore contribute to the generation of protein, DNA, and cell microarrays. In microfluidic patterning, the choice of both substrate and microflu...
متن کاملMicromolding of solvent resistant microfluidic devices.
We demonstrate a rapid fabrication procedure for solvent-resistant microfluidic devices based on the perfluoropolyether (PFPE) SIFEL. We carefully modified the poly-dimethylsiloxane (PDMS) micromolding procedure, such that it can still be executed using the standard facilities for PDMS devices. Most importantly, devices with a thin SIFEL layer for the patterned channels and a PDMS support layer...
متن کاملMicrofluidic channels fabricated from poly(vinylmethylsiloxane) networks that resist swelling by organic solvents.
This paper describes the use of poly(vinylmethylsiloxane) (PVMS) networks for fabricating microfluidic channels that resist swelling in the presence of organic solvents, thus providing a versatile alternative to poly(dimethylsiloxane) (PDMS). In particular, we demonstrate that in contrast to PDMS microchannels, the UV-treated PVMS structures exhibit high resistance to swelling by toluene.
متن کاملPoly(dimethylsiloxane) as a material for fabricating microfluidic devices.
This Account summarizes techniques for fabrication and applications in biomedicine of microfluidic devices fabricated in poly(dimethylsiloxane) (PDMS). The methods and applications described focus on the exploitation of the physical and chemical properties of PDMS in the fabrication or actuation of the devices. Fabrication of channels in PDMS is simple, and it can be used to incorporate other m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Analytical chemistry
دوره 75 23 شماره
صفحات -
تاریخ انتشار 2003