Development of a Robotic Structural Steel Placement System
نویسندگان
چکیده
The NIST Construction Metrology and Automation Group, in cooperation with the NIST Intelligent Systems Division, is researching robotic structural steel placement as part of a project to develop an Automated Steel Construction Testbed. This project was initiated in response to industry requests for advanced tools and methodologies to speed the erection of steel structures while maintaining or enhancing standards for worker safety and facility reliability. This initial effort integrates and extends prior NIST research in robotic crane employment, teleoperated steel beam placement, laser-based site metrology, construction component tracking, and web-enabled 3-D visualization.
منابع مشابه
Mobile Robot Pose Tracking for Performance Analysis
The NIST Construction Metrology and Automation Group, in cooperation with the NIST Intelligent Systems Division, is researching robotic structural steel placement as part of a project to develop an Automated Steel Construction Testbed. The initial phase of this project centers on tracking a six degree-of-freedom robotic crane with a laser-based site measurement system to provide position feedba...
متن کاملAdapting a teleoperated device for autonomous control using three-dimensional positioning sensors: experiences with the NIST RoboCrane
The National Institute of Standards and Technology (NIST) Construction Metrology and Automation Group, in cooperation with the NIST Intelligent Systems Division, is researching robotic structural steel placement through an ongoing program entitled ‘‘Performance of Innovative Technologies for Automated Steel Construction.’’ This program, initiated in response to an American Institute of Steel Co...
متن کاملDevelopment of a Real-time Control System Architecture for Automated Steel Construction
The National Institute of Standards and Technology (NIST) is developing a real-time control system for a robotic crane (the NIST RoboCrane) that will perform automated structural steel pick-and-place operations. The control system architecture is based on the NIST Real-time Control Systems (RCS) reference model, which defines a system development methodology and a hierarchical control architect...
متن کاملAdaptive fuzzy pole placement for stabilization of non-linear systems
A new approach for pole placement of nonlinear systems using state feedback and fuzzy system is proposed. We use a new online fuzzy training method to identify and to obtain a fuzzy model for the unknown nonlinear system using only the system input and output. Then, we linearized this identified model at each sampling time to have an approximate linear time varying system. In order to stabilize...
متن کاملAn LPV Approach to Sensor Fault Diagnosis of Robotic Arm
One of the major challenges in robotic arms is to diagnosis sensor fault. To address this challenge, this paper presents an LPV approach. Initially, the dynamics of a two-link manipulator is modelled with a polytopic linear parameter varying structure and then by using a descriptor system approach and a robust design of a suitable unknown input observer by means of pole placement method along w...
متن کامل