Closed Loop Fuzzy Integrated Control of AC-DC Converter
نویسنده
چکیده
Voltage fed single stage converters suffer from two main drawbacks: The efficiency is affected due to the reduced values of maximum DC link capacitor voltage and the power factor is not close to unity. To overcome these drawbacks, a boost type input current shaping converter, integrated with diode clamped topology is used. S ince this converter is a multilevel converter, it can be operated with high DC bus voltage. Conventional Proportional Integral Controllers are used in many applications due to their simplicity and robustness. The proportional action adjusts controller output according to the size of the error. This converter is made to operate with fuzzy logic controller to regulate the output voltage. The power factor is also maintained close to unity. The fuzzy logic controller is designed and the performance of the ac-dc converter is tested using MATLAB/SIMULINK based closed loop simulation.
منابع مشابه
A Closed Loop Control of Quadratic Boost Converter Using PID Controller
This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller. Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...
متن کاملREDUCTION OF INVERTER OUTPUT CURRENT RIPPLE IN CONNECTION OF FUEL CELL TO THE POWER NETWORK
In this paper, a method is introduced which reduces the harmonicdistortion of the inverter output current, connecting the fuelcell to the AC load. Using FUZZY LOGIC-PI (FLPI), the controllingmethod is engaged in optimum tuning of the PI controllercoefficients of this converter. This converter has only one DC-ACboost inverter and simultaneously has the task of increasingvoltage level and generat...
متن کاملDesigning control loop for DC-to-DC converters loaded with unknown AC dynamics
This paper presents a method for designing the control loop for dc-to-dc converters when uncertainties exist in the ac characteristics of the converter’s load. In the proposed method, a converter is initially considered as a stand-alone module feeding a current sink load and the control loop of the converter is then designed in a way that maximizes the robustness of the converter’s closed-loop ...
متن کاملSimulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching
A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...
متن کاملIncrease Efficiency of Photovoltaic Pumping System Based BLDC Motor Using Fuzzy Logic MPPT Control
The aim of this paper is presentation of an approach for modeling , control and optimization of a photovoltaic pumping system which contains a PV generator , DC-DC boost converter, MPPT controller, DC-AC inverter and a BLDC motor. We use an intelligent control method for searching the maximum power point (MPP). This method uses a fuzzy logic controller applied to a drive a DC–DC converter to an...
متن کامل